PI SCOPE
niektb·sluisbrinkie-eurorack-published·Sluisbrinkie Braun/Hardware/PI_SCOPE/PI_SCOPE.kicad_pcb
About the PI SCOPE PCB
PI SCOPE is an open source RP2040/RP2350 PCB design by niektb, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 40 × 110 mm, with 97 components from 33 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the AMS1117-5.0, AMS1117-3.3, MCP6002-I-SN, LM4040DBZ-10 and W25Q128JVS. By type, the board carries 35 capacitors, 30 resistors, 10 connectors, 9 ICs, 8 diodes and 3 switches.
It belongs with the audio and test & measurement designs in this gallery.
From the project
Published Modules of the Sluisbrinkie project
Main components on the PI SCOPE
PI SCOPE bill of materials (BOM)
97 components, 33 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-5.0 | SOT-223-3_TabPin2 | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 2 | MCP6002-I-SN | SO-8_3.9x4.9mm_P1.27mm | U3, U5 |
| 1 | ~ | GMT020-02 | U4 |
| 1 | LM4040DBZ-10 | SOT-23 | U7 |
| 1 | RP2040 | QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U8 |
| 1 | W25Q128JVS | SOIC-8_5.23x5.23mm_P1.27mm | U9 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U10 |
| 1 | CRYSTAL_GND24 Crystal_GND24 | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Eurorack Power | IDC-Header_2x05_P2.54mm_Vertical | J1 |
| 1 | USB_C_Receptacle_USB2.0_16P | UJ20-C-V-C-2-SMT-TR | J2 |
| 2 | CV1 | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J3, J7 |
| 2 | CV2 | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J4, J8 |
| 2 | CV3 | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J5, J9 |
| 2 | CV4 | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J6, J10 |
| 2 | SW_Push | SW_PUSH_6mm_H13mm | SW2, SW3 |
| 1 | PEC11R-3222F | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW4 |
| 8 | B140HW-7 Diodes Incorporated | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 |
| 1 | BLM15H | L_0402_1005Metric | FB1 |
| 7 | 22UF 22uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3, C4, C6, C12, C34 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 16 | 100N 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C11, C13, C14, C15, C17, C18, C19 +8 |
| 4 | 1n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C8, C9, C10 |
| 4 | 4U7F 4u7F | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C16, C26, C27, C28 |
| 2 | 100N 100n | C_0603_1608Metric | C29, C30 |
| 2 | 33P 33p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C31, C35 |
| 12 | 200K 200k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R4, R5, R7, R8, R10, R11 +4 |
| 4 | 33K 33k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R6, R9, R12 |
| 1 | 2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13 |
| 2 | 5K1 5k1 | R_0603_1608Metric | R14, R15 |
| 5 | 10K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16, R20, R24, R25, R26 |
| 2 | 330R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17, R22 |
| 2 | 27R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18, R19 |
| 2 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21, R23 |
PI SCOPE design files
The KiCad project lives in the niektb/sluisbrinkie-eurorack-published repository on GitHub; these links point at the commit this page was built from.
PI SCOPE: common questions
What microcontroller does the PI SCOPE use?
The PI SCOPE is built around the RP2040, from the RP2040/RP2350 family.
How big is the PI SCOPE PCB?
The PI SCOPE measures 40 × 110 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PI SCOPE?
97 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PI SCOPE design files?
From the niektb/sluisbrinkie-eurorack-published repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PI SCOPE design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which niektb chose for the repository.
Can I test firmware for the PI SCOPE without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in sluisbrinkie-eurorack-published
RP2040/RP2350
MMM main
niektb
40 × 110 mm145 parts4LCC-BY-SA-4.034!!UNTESTED!!
niektb
50.5 × 128.5 mm124 parts2LCC-BY-SA-4.034RP2040/RP2350
Toepler plus
niektb
20 × 106 mm112 parts2LCC-BY-SA-4.034Andes
niektb
40 × 110 mm109 parts2LCC-BY-SA-4.034Herford
niektb
40 × 110 mm109 parts2LCC-BY-SA-4.034Fv1 module
niektb
40 × 110 mm80 parts2LCC-BY-SA-4.034AVR/Arduino
USB C PD PSU
niektb
24 × 100 mm65 parts2LCC-BY-SA-4.034Divn
niektb
20 × 100 mm60 parts2LCC-BY-SA-4.034
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k