MMM main

niektb·sluisbrinkie-eurorack-published·Mutable Meta Module/Hardware/kicad/MMM_main/MMM_main.kicad_pcb

MMM main PCB layout, top view — open source RP2040/RP2350 board by niektb

About the MMM main PCB

MMM main is an open source RP2040/RP2350 PCB design by niektb, published on GitHub under the CC-BY-SA-4.0 license. It is a 4-layer board measuring 40 × 110 mm, with 145 components from 52 distinct parts.

Its main chip is the RP2350_80QFN, from the RP2040/RP2350 family. Other key parts include the AMS1117-5.0, W25Q128JVS, XC6206P332MR, MCP6002-I-SN and LM4040DBZ-10. By type, the board carries 54 resistors, 46 capacitors, 13 ICs, 13 connectors, 9 diodes and 7 switches.

It belongs with the audio designs in this gallery.

From the project

Published Modules of the Sluisbrinkie project

Hardware-platform to work in tandem with the software in this repository: https://github.com/poetaster/arduinoMI

MMM main, from the project README
From the project README

Main components on the MMM main

MMM main bill of materials (BOM)

145 components, 52 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2350_80QFN
U1
1
AMS1117-5.0
U2
1
W25Q128JVS
U4
2
XC6206P332MR
U5, U12
4
MCP6002-I-SN
U6, U9, U13, U14
1
LM4040DBZ-10
U7
1
TL072
U8
1
USBLC6-2SC6
U10
1
SSD1306
U11
1
ABM8-272-T3
Y1
1
Eurorack Power
J1
1
Conn_01x03
J2
1
CV1
J3
1
CV2
J4
1
CV3
J5
1
CV4
J6
1
OUT1
J7
1
OUT2
J8
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J13
1
CV5
J14
Show 32 more
QtyPartRefs
1
CV6
J15
1
CV7
J16
1
CV8
J17
4
SW_Push
SW1, SW2, SW3, SW4
3
RotaryEncoder
SW5, SW6, SW7
1
C2290
D6
8
1N5819WS
D9, D10, D11, D12, D13, D14, D15, D16
1
BLM15H
FB1
1
AOTA-B201610S3R3-101-T
L1
5
22UF
22uF
C1, C2, C3, C4, C12
8
100N
100n
C5, C11, C13, C14, C17, C42, C43, C51
4
4.7U
4.7u
C7, C9, C10, C28
12
100N
100n
C8, C15, C18, C19, C20, C21, C22, C23 +4
3
4U7F
4u7F
C16, C29, C44
8
1n
C30, C34, C37, C38, C45, C46, C47, C48
2
33P
33p
C31, C35
2
10N
10n
C32, C41
2
4N7
4n7
C36, C40
1
10K
10k
R1
10
200K
200k
R2, R7, R11, R14, R21, R34, R41, R45 +2
1
33
R3
10
100K
100k
R4, R8, R15, R20, R22, R36, R40, R46 +2
8
33K
33k
R5, R12, R27, R28, R51, R52, R53, R54
1
1k
R6
1
2k
R13
7
10K
10k
R16, R25, R26, R29, R30, R31, R32
1
330R
R17
2
27R
R18, R19
4
1k
R23, R24, R33, R42
4
3K9
3k9
R35, R37, R38, R39
2
2K2
2k2
R43, R44
2
5K1
5k1
R55, R56

MMM main design files

The KiCad project lives in the niektb/sluisbrinkie-eurorack-published repository on GitHub; these links point at the commit this page was built from.

MMM main: common questions

What microcontroller does the MMM main use?

The MMM main is built around the RP2350_80QFN, from the RP2040/RP2350 family.

How big is the MMM main PCB?

The MMM main measures 40 × 110 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the MMM main?

145 components, from 52 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MMM main design files?

From the niektb/sluisbrinkie-eurorack-published repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the MMM main design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which niektb chose for the repository.

Can I test firmware for the MMM main without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in sluisbrinkie-eurorack-published

Similar boards