Stm8-bootloader extended
niksrajendra·stm8-bootloader-extended·hardware/STM8003f3p development board/STM8003f3p development board.kicad_pcb
About the Stm8-bootloader extended PCB
Stm8-bootloader extended is an open source STM32 PCB design by niksrajendra, published on GitHub. It is a 2-layer board measuring 40 × 60 mm, with 131 components from 42 distinct parts.
Its main chip is the AS5047P, from the STM32 family. Other key parts include the DRV8302, LP2985-33DBVR, MCP2551-I/SN, USBLC6-2SC6Y and STM32F405RGT6. By type, the board carries 51 capacitors, 39 resistors, 12 connectors, 12 diodes, 6 ICs and 6 transistors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
STM8 bootloader designed to work with any available communication interface and configure for different feature like secure, unsecure bootloader. This repo is extended version of basic stm8 bootloader to have additional and configurable features for bootloader.
Main components on the Stm8-bootloader extended
Stm8-bootloader extended bill of materials (BOM)
131 components, 42 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DRV8302 | HTSSOP-56 | U1 |
| 1 | LP2985-33DBVR | TI-DBV5_V | U2 |
| 1 | AS5047P | TSSOP-14 | U3 |
| 1 | MCP2551-I/SN | MCHP-SN8_V | U4 |
| 1 | USBLC6-2SC6Y | SOT23-6 | U5 |
| 1 | STM32F405RGT6 | QFP50P1200X1200X160-64N | U6 |
| 6 | MDU1512RH | PDFN56 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 1 | 12MHz | MURA-CSTCE_G_V | X1 |
| 2 | JUMPER | JUMPER | J1, J2 |
| 2 | XT30PW-M | XT30PW-M | P1, P2 |
| 3 | DP-01 | DP-01 | P3, P4, P5 |
| 1 | JST_SH-05P | SH-5P-SIDE | P6 |
| 2 | JST_SH-02P | SH-2P-SIDE | P7, P8 |
| 1 | JST_SH-04P | SH-04-SIDE | P9 |
| 1 | HEADER-4P | female_header-4p | P10 |
| 1 | HSMH-C190 | AVAG-HSMX-C190_V | DS1 |
| 1 | LTST-C190KSKT | LTST-C190KSKT_V | DS2 |
| 1 | USB-C | USB-C-A40-00119 | USB1 |
| 1 | B330A-13-F | FP-SMA-MFG | D1 |
| 1 | 1N4148WS | FAIR-SOD-323_V | D2 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 9 | 1N4148WT | FAIR-SOD-523F-2_V | D3, D4, D5, D6, D7, D8, D9, D10 +1 |
| 1 | 1N4007 SMD | FP-1N4007_SMD-IPC_A | D12 |
| 1 | 22uH | FP-IHLP-2525CZ-FP_2_413x3-MFG | L1 |
| 2 | Capacitor 6.8 nF +/- 10% 16 V 0402 | CAPC1005X56X25NL10T15 | C1, C2 |
| 4 | Capacitor 22nF +/-20% 10V 0402 | CAPC0402(1005)60_L | C3, C11, C17, C18 |
| 6 | Capacitor 100 nF +/-10% 50 V 0603 | CAPC1608X90X40NL10T20 | C4, C6, C7, C9, C12, C15 |
| 5 | Capacitor 4.7µF +/-20% 10V 0603 | CAPC0603(1608)100_L | C5, C16, C33, C34, C35 |
| 1 | Capacitor 47µF +/-40% 6.3V 0805 | CAPC0805(2012)145_L | C8 |
| 1 | Capacitor 2,2µF +/-20% 10V 0402 | CAPC0402(1005)60_L | C10 |
| 2 | Capacitor 1µF +/-20% 10V 0402 | CAPC0402(1005)60_L | C13, C14 |
| 10 | Capacitor 10 uF +/- 10% 16 V 0805 | CAPC2013X135X45NL10T25 | C19, C20, C21, C22, C23, C24, C25, C26 +2 |
| 2 | Capacitor 1uF +/- 10% 16V 0603 | CAPC1608X90X35ML15T15 | C29, C30 |
| 17 | Capacitor 100nF +/-20% 50V 0402 | CAPC0402(1005)60_L | C31, C36, C37, C38, C39, C40, C41, C42 +9 |
| 1 | Capacitor 10nF +/-20% 50V 0402 | CAPC0402(1005)60_L | C32 |
| 1 | Resistor 15k +/-1% 0402 63 mW | RESC1005X40X25ML10T10 | R1 |
| 7 | Resistor 10k +/-1% 0603 100 mW | RESC1608X55X25ML10T15 | R2, R4, R6, R7, R8, R12, R13 |
| 1 | Resistor 200K +/-1 % 0402 63 mW | RESC0402(1005)_L | R3 |
| 3 | Resistor 10k +/-1% 0402 100 mW | RESC1005X40X25ML05T05 | R5, R9, R10 |
| 18 | Resistor 0R +/- 5% 0402 100 mW | RESC1005X40X25ML05T05 | R11, R17, R18, R19, R25, R26, R27, R28 +10 |
| 6 | Resistor 120R +/-5 % 0603 0.1 W | RESC0603(1608)_L | R14, R15, R16, R20, R21, R22 |
| 2 | 0.001R-2512 | FP-CRCW2512-e3-MFG | R23, R24 |
| 1 | 120R(0603) | FP-RMCF0603-IPC_A | R32 |
Stm8-bootloader extended design files
The KiCad project lives in the niksrajendra/stm8-bootloader-extended repository on GitHub; these links point at the commit this page was built from.
Stm8-bootloader extended: common questions
What microcontroller does the Stm8-bootloader extended use?
The Stm8-bootloader extended is built around the AS5047P, from the STM32 family.
How big is the Stm8-bootloader extended PCB?
The Stm8-bootloader extended measures 40 × 60 mm, has 2 copper layers and is 1.69112 mm thick.
How many components are on the Stm8-bootloader extended?
131 components, from 42 distinct parts. The full bill of materials is listed on this page.
Where can I download the Stm8-bootloader extended design files?
From the niksrajendra/stm8-bootloader-extended repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Stm8-bootloader extended design in my own project?
The repository has no license, so all rights stay with niksrajendra. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Stm8-bootloader extended without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k