15 open source boards using the DRV8302
Real designs built with the DRV8302, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Bldc
mrkindustries
38.5 × 65 mm124 parts2LNo license112STM32
E bike conversion kit
ansh1113
186.9 × 129.8 mm175 parts4LNo license1STM32
Ebike controller pcb compact
PetteriAimonen
77 × 30 mm143 parts4LNo license1STM32
Electrical
usernamegemaoa
38.5 × 65 mm124 parts2LNo license1STM32
Control remoto de silla de ruedas
i3dcor
38.5 × 65 mm123 parts2LAGPL-3.01STM32
VESG
KoJZz
68.2 × 125.3 mm137 parts4LNo license0STM32
Stm8-bootloader extended
niksrajendra
40 × 60 mm131 parts2LNo license0STM32
Bldc hardware
glocklueng
38.5 × 65 mm124 parts2LNo license0STM32
Skripsi bldc
8qbal
38.5 × 65 mm123 parts2LNo license0STM32
Besc hw
augustbering
39.9 × 97.5 mm120 parts4LNo license0STM32
Bldc hardware-1
koson
82 × 54 mm99 parts2LNo license0BLDC Driver 4.6
sPyOpenSource
39 × 59 mm70 parts4LMIT8STM32
BLDC Driver 4.6
UofSSpaceTeam
75.2 × 49.3 mm112 parts2LNo license5STM32
After remap - Copy
KoJZz
41.2 × 65 mm127 parts4LNo license0STM32
BLDC 4
KoJZz
38.5 × 65 mm123 parts2LNo license0
How designs wire the DRV8302
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the DRV8302 connects to, and the resistors, capacitors and other passives placed on it.
- The DTC pin has a resistor to GND on 13 of 13 designs, most often 10 kΩ.
- The GVDD pin has a capacitor to GND on 13 of 13 designs, most often 2.2 µF (then 4.7 µF).
- The CP1 pin has a series capacitor on 13 of 13 designs, most often 22 nF (then 100 nF).
- The CP2 pin has a series capacitor on 13 of 13 designs, most often 22 nF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| RT_CLKpin 1 | Connected to: Signal 92% |
|
| COMPpin 2 | Connected to: Signal 92% |
|
| VSENSEpin 3 | Connected to: Signal 92% |
|
| PWRGDpin 4 | Connected to: Not connected 100% | — |
| OCTWpin 5 | Connected to: Not connected 92% | — |
| DTCpin 7 | Connected to: Signal 100% |
|
| M_PWMpin 8 | Connected to: GND 92% | — |
| M_OCpin 9 | Connected to: VCC 85% | — |
| GAINpin 10 | Connected to: GND 92% | — |
| OC_ADJpin 11 | Connected to: Signal 100% |
|
| GVDDpin 13 | Connected to: Signal 100% |
|
| CP1pin 14 | Connected to: Signal 100% |
|
| CP2pin 15 | Connected to: Signal 100% |
|
| DVDDpin 23 | Connected to: Signal 92% |
|
| REFpin 24 | Connected to: VCC 100% | — |
| AVDDpin 27 | Connected to: Signal 100% |
|
| AGNDpin 28 | Connected to: GND 100% | — |
| PVDD1pin 29 | Connected to: A connector 100% |
|
| SP2pin 30 | Connected to: Signal 92% |
|
| SN2pin 31 | Connected to: Signal 100% |
|
| SP1pin 32 | Connected to: Signal 92% |
|
| SN1pin 33 | Connected to: Signal 100% |
|
| SL_Cpin 34 | Connected to: Signal 92% |
|
| GL_Cpin 35 | Connected to: Signal 100% |
|
| SH_Cpin 36 | Connected to: A connector 100% |
|
| GH_Cpin 37 | Connected to: Signal 100% |
|
| BST_Cpin 38 | Connected to: Signal 100% |
|
| SL_Bpin 39 | Connected to: GND 92% | — |
| GL_Bpin 40 | Connected to: Signal 100% |
|
| SH_Bpin 41 | Connected to: A connector 100% |
|
| GH_Bpin 42 | Connected to: Signal 100% |
|
| BST_Bpin 43 | Connected to: Signal 100% |
|
| SL_Apin 44 | Connected to: Signal 100% |
|
| GL_Apin 45 | Connected to: Signal 100% |
|
| SH_Apin 46 | Connected to: A connector 100% |
|
| GH_Apin 47 | Connected to: Signal 100% |
|
| BST_Apin 48 | Connected to: Signal 100% |
|
| BIASpin 49 | Connected to: Signal 100% |
|
| PHpin 50, 51 | Connected to: Signal 92% |
|
| BST_BKpin 52 | Connected to: Signal 92% |
|
15 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Bldc by mrkindustries, BLDC Driver 4.6 by sPyOpenSource, BLDC Driver 4.6 by UofSSpaceTeam and E bike conversion kit by ansh1113.
The DRV8302 in open source designs
The gallery holds 15 open source boards using the DRV8302 from 13 GitHub repositories; a typical one measures about 39.9 × 65 mm and carries around 124 components.
60% are two-layer designs, the rest use four layers or more, and 13% carry an open source license.
The most starred is Bldc by mrkindustries.
Parts used alongside the DRV8302
Microcontrollers on boards using the DRV8302
What boards using the DRV8302 are built for
DRV8302: common questions
Where can I find a DRV8302 reference design?
Each of the 15 boards on this page is a real design using the DRV8302. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the DRV8302 DTC pin?
The DTC pin has a resistor to GND on 13 of 13 designs, most often 10 kΩ. Counted from the KiCad layouts of 13 open source designs using the DRV8302.
How is the DRV8302 GVDD pin connected?
The GVDD pin has a capacitor to GND on 13 of 13 designs, most often 2.2 µF (then 4.7 µF). Counted from the KiCad layouts of 13 open source designs using the DRV8302.
How is the DRV8302 CP1 pin connected?
The CP1 pin has a series capacitor on 13 of 13 designs, most often 22 nF (then 100 nF). Counted from the KiCad layouts of 13 open source designs using the DRV8302.
What parts are used alongside the DRV8302?
The STM32F40X_LQFP64, TC2117 and SN65HVD232 appear in the most repositories here.
Which microcontrollers do boards using the DRV8302 use?
Most are built on STM32 (14).
How big is a typical board using the DRV8302?
The median is 39.9 × 65 mm, and 60% are two-layer designs.
What is the most popular open source board using the DRV8302?
By GitHub stars, Bldc by mrkindustries, with 112 stars.
Can I simulate one of these boards using the DRV8302 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.