Slime2
ntxngle·slime2·pcb/track.kicad_pcb
About the Slime2 PCB
Slime2 is an open source ESP32 PCB design by ntxngle, published on GitHub. It is a 4-layer board measuring 30.9 × 19.6 mm, with 25 components from 15 distinct parts.
Its main chip is the ESP-WROOM-02, from the ESP32 family. Other key parts include the HX MINI MSK12CO2, ICM-45686, HT7833 and MCP73831-2-OT. By type, the board carries 9 resistors, 8 capacitors, 5 ICs, 2 diodes and 1 connector.
It belongs with the iot & wireless and dev boards & breakouts designs in this gallery.
From the project
yet another slimevr tracker
A ESP8266 based SlimeVR tracker with all of the features of the much bigger and cumbersome official/DIY ones.
A friend introduced me to these trackers by building his own. He had purchased the many modules off of aliexpress and him, a friend, and myself gathered at my house to solder them. Apart from the legendary "soldering party" (fumes included) that subsequently happened, we managed to solder together the modules on a carrier board, with the occasional wire jumper when things went wrong. To me, the whole project seemed silly. Why buy IMU, Devboard, and charging modules when all of these…
Main components on the Slime2
Slime2 bill of materials (BOM)
25 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HX MINI MSK12CO2 | SW-SMD_MSK12CO2 | U1 |
| 1 | ICM-45686 | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U2 |
| 1 | HT7833 | SOT-89-3 | U3 |
| 1 | ESP-WROOM-02 | ESP-WROOM-02 | U4 |
| 1 | MCP73831-2-OT | SOT-23-5 | U5 |
| 1 | SOICDEV | SOIC_clipProgSmall | J1 |
| 2 | LED | LED_0402_1005Metric | D1, D2 |
| 1 | 4.7uF | C_0402_1005Metric | C1 |
| 5 | 0.1uF | C_0402_1005Metric | C2, C5, C6, C7, C8 |
| 1 | 10uF | C_0402_1005Metric | C3 |
| 1 | 22uF | C_0402_1005Metric | C4 |
| 2 | 2.2k | R_0402_1005Metric | R1, R8 |
| 5 | 10k | R_0402_1005Metric | R2, R3, R4, R5, R6 |
| 1 | 2.7k | R_0402_1005Metric | R7 |
| 1 | 180k | R_0402_1005Metric | R9 |
Slime2 design files
The KiCad project lives in the ntxngle/slime2 repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/track.kicad_pcb
- Schematicpcb/track.kicad_sch
Slime2: common questions
What microcontroller does the Slime2 use?
The Slime2 is built around the ESP-WROOM-02, from the ESP32 family.
How big is the Slime2 PCB?
The Slime2 measures 30.9 × 19.6 mm, has 4 copper layers and is 1.565 mm thick.
How many components are on the Slime2?
25 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Slime2 design files?
From the ntxngle/slime2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Slime2 design in my own project?
The repository has no license, so all rights stay with ntxngle. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Slime2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k