23 open source boards using the HT75XX-1-SOT89

Real designs built with the HT75XX-1-SOT89, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

23 boardsClear filters|Most starred

How designs wire the HT75XX-1-SOT89

Read from the KiCad layouts of 16 open source designs, one per repository: what each pin of the HT75XX-1-SOT89 connects to, and the resistors, capacitors and other passives placed on it.

  • The VIN pin has a decoupling capacitor on 12 of 16 designs, most often 10 µF (then 22 µF).
  • The VOUT pin has a decoupling capacitor on 10 of 16 designs, most often 10 µF (then 22 µF).
GNDpin 1Connected to: GND 94%
VINpin 2Connected to: 5V 81%
  • Decoupling capacitor on 75% · 10 µF (5), 22 µF (3), 1 µF (3)
VOUTpin 3Connected to: 3.3V 81%
  • Decoupling capacitor on 63% · 10 µF (4), 22 µF (3), 100 nF (2)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Airspeed SensorBoard by pms67, Controller by candykingdom, DoorbellCamPhy by mc-cat-tty and DC31 CHV Badge Board by car-hacking-village.

The HT75XX-1-SOT89 in open source designs

The gallery holds 23 open source boards using the HT75XX-1-SOT89 from 16 GitHub repositories; a typical one measures about 51.4 × 57.7 mm and carries around 52 components.

78% are two-layer designs, the rest use four layers or more, and 35% carry an open source license.

The most starred is Airspeed SensorBoard by pms67.

Microcontrollers on boards using the HT75XX-1-SOT89

HT75XX-1-SOT89: common questions

Where can I find a HT75XX-1-SOT89 reference design?

Each of the 23 boards on this page is a real design using the HT75XX-1-SOT89. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the HT75XX-1-SOT89 VIN pin?

The VIN pin has a decoupling capacitor on 12 of 16 designs, most often 10 µF (then 22 µF). Counted from the KiCad layouts of 16 open source designs using the HT75XX-1-SOT89.

What decoupling capacitors do designs use on the HT75XX-1-SOT89 VOUT pin?

The VOUT pin has a decoupling capacitor on 10 of 16 designs, most often 10 µF (then 22 µF). Counted from the KiCad layouts of 16 open source designs using the HT75XX-1-SOT89.

What parts are used alongside the HT75XX-1-SOT89?

The RP2040, STM32F030F4Px, USBLC6-2SC6, DRV8848 and LMV321 appear in the most repositories here.

Which microcontrollers do boards using the HT75XX-1-SOT89 use?

Most are built on STM32 (11), ESP32 (4), RP2040/RP2350 (3) and AVR/Arduino (1).

How big is a typical board using the HT75XX-1-SOT89?

The median is 51.4 × 57.7 mm, and 78% are two-layer designs.

What is the most popular open source board using the HT75XX-1-SOT89?

By GitHub stars, Airspeed SensorBoard by pms67, with 17 stars.

Can I simulate one of these boards using the HT75XX-1-SOT89 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part