Okeeb
OklahomaOpenSourceHardware·Oklahoma-Open-Hardware-Mechanical-Keyboard
About the Okeeb PCB
Okeeb is an open source ESP32 PCB design by OklahomaOpenSourceHardware, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 306.5 × 96.9 mm, with 198 components from 32 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the TLV62569DBVR, PCA9555PW, SN65220DBVT and ATtiny828-A. By type, the board carries 81 diodes, 63 relays, 23 resistors, 15 capacitors, 8 ICs and 1 crystal.
It belongs with the keyboards designs in this gallery.
From the project
Oklahoma themed open source hardware licensed keyboard from the Oklahoma community

Main components on the Okeeb
Okeeb bill of materials (BOM)
198 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 1 | TLV62569DBVR TLV62569DBV | SOT-23-5 | U2 |
| 4 | PCA9555PW | TSSOP-24_4.4x7.8mm_P0.65mm | U3, U4, U5, U6 |
| 1 | SN65220DBVT SN65220 | SOT-23-6 | U7 |
| 1 | ATtiny828-A | TQFP-32_7x7mm_P0.8mm | U8 |
| 1 | 32.768KHz | Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | USB4105-GF-A USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J4 |
| 3 | w_2 stabilizer | Stabilizer_Cherry_MX_2.00u | DRA1, DRA2, DRA3 |
| 2 | w_3 stabilizer | Stabilizer_Cherry_MX_3.00u | DRA4, DRA5 |
| 63 | KEYSW | Kailh_socket_MX_p1ref | K1, K2, K3, K4, K5, K6, K7, K8 +55 |
| 1 | SD03C-7 3.3v_TVS | D_SOD-323 | D1 |
| 64 | SK6805 | LED_SK6805_PLCC4_2.4x2.7mm_P1.3mm | D2, D3, D4, D5, D6, D7, D8, D9 +56 |
| 16 | SK6812MINI | LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D66, D67, D68, D69, D70, D71, D72, D73 +8 |
| 1 | MDMK4040T2R2MM 2.2uH | L_Taiyo-Yuden_MD-4040 | L1 |
| 1 | EMK105B7104KVHF 1u | C_0402_1005Metric | C1 |
| 1 | JMK107C6475KA-T 4.7u | C_0805_2012Metric | C2 |
| 3 | EMK105B7104KVHF 0.1u | C_0402_1005Metric | C3, C12, C16 |
| 1 | LMK212ABJ106MG-T 0.1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | EMK105B7103KVHF 6.8p | C_0402_1005Metric | C5 |
| 4 | 0.1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7, C9, C11 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | EMK105B7103KVHF 0.01u | C_0402_1005Metric | C8 |
| 1 | 4.7u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13 |
| 2 | 22p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14, C15 |
| 3 | ESR03EZPJ103 10K | R_0402_1005Metric | R3, R10, R13 |
| 2 | ESR03EZPJ103 NP | R_0402_1005Metric | R4, R9 |
| 1 | RC0603FR-13680KL 680k | R_0402_1005Metric | R5 |
| 1 | RC0603FR-07150KL 150K | R_0402_1005Metric | R6 |
| 2 | CR0603-FX-4990ELF 499R | R_0402_1005Metric | R7, R8 |
| 2 | RC0603FR-1315KL 15K | R_0402_1005Metric | R11, R12 |
| 2 | CR0603-FX-5101ELF 5.1k | R_0402_1005Metric | R14, R17 |
| 2 | RK73B1JTTDD270J 27 | R_0402_1005Metric | R15, R16 |
| 8 | R_Network08_US | R_Array_SIP9 | RN1, RN2, RN3, RN4, RN5, RN6, RN7, RN8 |
Okeeb design files
The KiCad project lives in the OklahomaOpenSourceHardware/Oklahoma-Open-Hardware-Mechanical-Keyboard repository on GitHub; these links point at the commit this page was built from.
- Layoutokeeb.kicad_pcb
- Schematicokeeb.kicad_sch
Okeeb: common questions
What microcontroller does the Okeeb use?
The Okeeb is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Okeeb PCB?
The Okeeb measures 306.5 × 96.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Okeeb?
198 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the Okeeb design files?
From the OklahomaOpenSourceHardware/Oklahoma-Open-Hardware-Mechanical-Keyboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Okeeb design in my own project?
Yes, under the terms of its GPL-3.0 license, which OklahomaOpenSourceHardware chose for the repository.
Can I test firmware for the Okeeb without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k