6 open source boards using the SN65220DBVT
Real designs built with the SN65220DBVT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Okeeb
OklahomaOpenSourceHardware
306.5 × 96.9 mm198 parts2LGPL-3.02ESP32
MR1
EpicQuestBio
80 × 60 mm101 parts4LAGPL-3.00ESP32
MR1
LokiMetaSmith
80 × 60 mm101 parts4LAGPL-3.00ESP32
Temp sensor
juniper-garden
48.2 × 24.9 mm55 parts2LGPL-3.00RP2040/RP2350
Techlahoma Badge 2024
OklahomaOpenSourceHardware
43.5 × 40.5 mm68 parts2LNo license3Nordic nRF
Techno Buffalo
OklahomaOpenSourceHardware
88.4 × 62.5 mm60 parts2LNo license3
How designs wire the SN65220DBVT
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SN65220DBVT connects to, and the resistors, capacitors and other passives placed on it.
- The K pin has a series resistor on 4 of 5 designs, most often 27 Ω.
- The K pin has a resistor to GND on 4 of 5 designs, most often 15 kΩ.
- Pin 3 has a resistor to GND on 4 of 5 designs, most often 15 kΩ.
- Pin 3 has a series resistor on 4 of 5 designs, most often 27 Ω.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Kpin 1 | Connected to: A connector 80% · 3.3V 20% |
|
| GNDpin 2, 5 | Connected to: GND 89% | — |
| Pin 3 | Connected to: A connector 80% · not connected 20% |
|
| Bpin 4 | Connected to: A connector 100% |
|
| Apin 6 | Connected to: A connector 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Techlahoma Badge 2024 by OklahomaOpenSourceHardware, Okeeb by OklahomaOpenSourceHardware, MR1 by EpicQuestBio and Temp sensor by juniper-garden.
The SN65220DBVT in open source designs
The gallery holds 6 open source boards using the SN65220DBVT from 5 GitHub repositories; a typical one measures about 80 × 60 mm and carries around 85 components.
67% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Techlahoma Badge 2024 by OklahomaOpenSourceHardware.
Parts used alongside the SN65220DBVT
Microcontrollers on boards using the SN65220DBVT
What boards using the SN65220DBVT are built for
SN65220DBVT: common questions
Where can I find a SN65220DBVT reference design?
Each of the 6 boards on this page is a real design using the SN65220DBVT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the SN65220DBVT K pin?
The K pin has a series resistor on 4 of 5 designs, most often 27 Ω. Counted from the KiCad layouts of 5 open source designs using the SN65220DBVT.
What resistor goes on the SN65220DBVT pin 3?
Pin 3 has a resistor to GND on 4 of 5 designs, most often 15 kΩ. Counted from the KiCad layouts of 5 open source designs using the SN65220DBVT.
What resistor goes on the SN65220DBVT B pin?
The B pin has a resistor to GND on 4 of 4 designs, most often 15 kΩ. Counted from the KiCad layouts of 5 open source designs using the SN65220DBVT.
What parts are used alongside the SN65220DBVT?
The TLV62569DBVR, ADR4520ARZ-R7, ESP32-S3-MINI-1U-N8, LM27762DSSR and LT3045EDD-1#TRPBF appear in the most repositories here.
Which microcontrollers do boards using the SN65220DBVT use?
Most are built on ESP32 (4), Nordic nRF (1) and RP2040/RP2350 (1).
How big is a typical board using the SN65220DBVT?
The median is 80 × 60 mm, and 67% are two-layer designs.
What is the most popular open source board using the SN65220DBVT?
By GitHub stars, Techlahoma Badge 2024 by OklahomaOpenSourceHardware, with 3 stars.
Can I simulate one of these boards using the SN65220DBVT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.