HardLabs

ESP32-C6-DevKit-Lipo

OLIMEX·ESP32-C6-DevKit-Lipo·HARDWARE/ESP32-C6-DevKit-Lipo.Rev.A/ESP32-C6-DevKit-Lipo_Rev_A.kicad_pcb

ESP32-C6-DevKit-Lipo PCB layout, top view — open source ESP32 board by OLIMEX

About the ESP32-C6-DevKit-Lipo PCB

ESP32-C6-DevKit-Lipo is an open source ESP32 PCB design by OLIMEX, published on GitHub. It is a 2-layer board measuring 25.4 × 44.5 mm, with 71 components from 37 distinct parts.

Its main chip is the ESP32-C6-MINI-1-N4, from the ESP32 family. Other key parts include the TPS62A02ADRLR(SOT-563-6), TP4054-42-SOT25-R and CH340X(MSOP-10). By type, the board carries 30 resistors, 14 capacitors, 7 diodes, 4 ICs, 2 transistors and 2 LEDs.

It belongs with the iot & wireless, power & battery and dev boards & breakouts designs in this gallery.

From the project

ESP32-C6 WiFi6, Bluetooth 5 LE, Zigbee, Thread, Matter development board with LiPo battery

https://www.olimex.com/Products/IoT/ESP32-C6/ESP32-C6-DevKit-Lipo/

ESP32-C6-DevKit-Lipo, from the project README
From the project README

Main components on the ESP32-C6-DevKit-Lipo

ESP32-C6-MINI-1-N4TPS62A02ADRLR(SOT-563-6)TP4054-42-SOT25-RCH340X(MSOP-10)

ESP32-C6-DevKit-Lipo bill of materials (BOM)

71 components, 37 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-C6-MINI-1-N4
U1
1
TPS62A02ADRLR(SOT-563-6)
U2
1
TP4054-42-SOT25-R
U3
1
CH340X(MSOP-10)
U4
2
BC817-40(SOT23)
Q1, Q2
1
DW02S
BAT1
3
Opened
BAT_PWR_E1, BAT_SENS_E1, PWR_SENS_E1
2
HN1X11
HN1x11
EXT1, EXT2
1
WPM2015-3
IRLML6402TRPbF
FET1
1
P-B-V-10-LF
UEXT1
2
USB-C-16P-F(A40-00119-A52-12)
USB-C1, USB-UART1
1
YTS-A016-X
USER1
1
LED/YELLOW/0603
LED/Yellow/0603
CHARGE1
1
LED/GREEN/0603
USER_LED1
7
1N5819S4(SOD-123)
D1, D2, D3, D4, D5, D6, D7
1
1.0uH/4.2A/DCR=35mR/20%/2.00x1.60x1.00mm/L2016(PIM201610-1R0MTS00)
L1
5
22uF/6.3V/20%/X5R/C0603
C1, C7, C8, C11, C14
3
100nF/10V/20%/X5R/C0402
C2, C4, C12
1
1uF/10V/10%/X5R/C0603
C3
2
150pF/50V/2%/NP0/C0402
C5, C6
Show 17 more
QtyPartRefs
1
NA(120pF/50V/5%/C0G/C0402)
C9
1
NA(22uF/6.3V/20%/X5R/C0603)
C10
1
NA(100nF/10V/20%/X5R/C0402)
C13
1
220K/R0402
220k/R0402
R1
6
10K/R0402
10k/R0402
R2, R4, R9, R10, R18, R19
3
470K/R0402
470k/R0402
R3, R5, R6
4
2.2K/R0402
2.2k/R0402
R7, R8, R12, R21
2
NA(10k/R0402)
R11, R20
2
22R/R0402
R13, R14
1
180k/1%/R0402
R15
1
10k/1%/R0402
R16
1
40.2k/1%/R0402
R17
2
1K/R0402
1k/R0402
R22, R28
1
4.7K/R0402
4.7k/R0402
R23
4
5.1k/1%/R0402
R24, R25, R26, R27
1
100R/R0402
R29
1
220R/R0402
R30

ESP32-C6-DevKit-Lipo design files

The KiCad project lives in the OLIMEX/ESP32-C6-DevKit-Lipo repository on GitHub; these links point at the commit this page was built from.

ESP32-C6-DevKit-Lipo: common questions

What microcontroller does the ESP32-C6-DevKit-Lipo use?

The ESP32-C6-DevKit-Lipo is built around the ESP32-C6-MINI-1-N4, from the ESP32 family.

How big is the ESP32-C6-DevKit-Lipo PCB?

The ESP32-C6-DevKit-Lipo measures 25.4 × 44.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ESP32-C6-DevKit-Lipo?

71 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ESP32-C6-DevKit-Lipo design files?

From the OLIMEX/ESP32-C6-DevKit-Lipo repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ESP32-C6-DevKit-Lipo design in my own project?

The repository has no license, so all rights stay with OLIMEX. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ESP32-C6-DevKit-Lipo without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards