24 open source boards using the CH340X(MSOP-10)

Real designs built with the CH340X(MSOP-10), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

24 boardsClear filters|Most starred

How designs wire the CH340X(MSOP-10)

Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the CH340X(MSOP-10) connects to, and the resistors, capacitors and other passives placed on it.

  • The RTS# pin has a series resistor on 13 of 13 designs, most often 1 kΩ (then 2.2 kΩ).
  • The CTS# pin has a series resistor on 13 of 13 designs, most often 4.7 kΩ.
  • The TNOW/DTR# pin has a series resistor on 13 of 13 designs, most often 4.7 kΩ (then 1 kΩ).
  • The VCC pin has a decoupling capacitor on 13 of 13 designs, most often 22 µF (then 100 nF).
GNDpin 3Connected to: GND 100%
RTS#pin 4Connected to: Signal 100%
  • Series resistor on 100% · 1 kΩ (12), 2.2 kΩ (1)
CTS#pin 5Connected to: Signal 100%
  • Series resistor on 100% · 4.7 kΩ (13)
TNOW/DTR#pin 6Connected to: Signal 100%
  • Series resistor on 100% · 4.7 kΩ (13), 1 kΩ (12), 2.2 kΩ (1)
VCCpin 7Connected to: 5V 92%
  • Decoupling capacitor on 100% · 22 µF (10), 100 nF (2), 10 µF (1)
RXDpin 9Connected to: Signal 100%
  • Pull-up to 5V on 77% · 10 kΩ (10)
V3pin 10Connected to: Signal 85% · 3.3V 15%
  • Capacitor to GND on 100% · 100 nF (13)
  • Series resistor on 85% · 10 kΩ (11)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32-PoE Rev M by OLIMEX, ESP32-GATEWAY Rev H by OLIMEX, ESP32-EVB Rev L by OLIMEX and ESP32-PoE-ISO Rev M by OLIMEX.

The CH340X(MSOP-10) in open source designs

The gallery holds 24 open source boards using the CH340X(MSOP-10) from 13 GitHub repositories; a typical one measures about 28 × 75.2 mm and carries around 129 components.

54% are two-layer designs, the rest use four layers or more, and 54% carry an open source license.

The most starred is ESP32-PoE Rev M2 by OLIMEX.

Microcontrollers on boards using the CH340X(MSOP-10)

CH340X(MSOP-10): common questions

Where can I find a CH340X(MSOP-10) reference design?

Each of the 24 boards on this page is a real design using the CH340X(MSOP-10). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the CH340X(MSOP-10) RTS# pin?

The RTS# pin has a series resistor on 13 of 13 designs, most often 1 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 13 open source designs using the CH340X(MSOP-10).

What resistor goes on the CH340X(MSOP-10) CTS# pin?

The CTS# pin has a series resistor on 13 of 13 designs, most often 4.7 kΩ. Counted from the KiCad layouts of 13 open source designs using the CH340X(MSOP-10).

What resistor goes on the CH340X(MSOP-10) TNOW/DTR# pin?

The TNOW/DTR# pin has a series resistor on 13 of 13 designs, most often 4.7 kΩ (then 1 kΩ). Counted from the KiCad layouts of 13 open source designs using the CH340X(MSOP-10).

What parts are used alongside the CH340X(MSOP-10)?

The TPS62A02ADRLR(SOT-563-6), ESP32-WROOM-32E-N4, LAN8710A-EZC(QFN32), TP4054-42-SOT25-R and NA(SN74LVC1G04DBVR(SOT23-5)) appear in the most repositories here.

Which microcontrollers do boards using the CH340X(MSOP-10) use?

Most are built on ESP32 (24).

How big is a typical board using the CH340X(MSOP-10)?

The median is 28 × 75.2 mm, and 54% are two-layer designs.

What is the most popular open source board using the CH340X(MSOP-10)?

By GitHub stars, ESP32-PoE Rev M2 by OLIMEX, with 407 stars.

Can I simulate one of these boards using the CH340X(MSOP-10) before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part