32 open source boards using the TP4054-42-SOT25-R

Real designs built with the TP4054-42-SOT25-R, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

32 boardsClear filters|Most starred

How designs wire the TP4054-42-SOT25-R

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TP4054-42-SOT25-R connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 5 of 7 designs, most often 22 µF (then 47 µF).
  • The PROG pin has a resistor to GND on 5 of 7 designs, most often 10 kΩ (then 2 kΩ).
  • The CHRGB pin has a series resistor on 4 of 7 designs, most often 2.2 kΩ.
  • The VBAT pin has a series resistor on 4 of 7 designs, most often 2.2 kΩ (then 470 kΩ).
CHRGBpin 1Connected to: Signal 57% · 5V 29%
  • Series resistor on 57% · 2.2 kΩ (4)
GNDpin 2Connected to: GND 71% · 5V 29%
VBATpin 3Connected to: A connector 29% · VBAT 43%
  • Series resistor on 57% · 2.2 kΩ (2), 470 kΩ (1), 100 kΩ (1)
VCCpin 4Connected to: 5V 71% · a signal 29%
  • Decoupling capacitor on 71% · 22 µF (2), 47 µF (1), 1 µF (1)
PROGpin 5Connected to: Signal 71% · GND 29%
  • Resistor to GND on 71% · 10 kΩ (3), 2 kΩ (1), 2.2 kΩ (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32-EVB Rev A by OLIMEX, ESP32-C3-DevKit-Lipo Rev A by OLIMEX, ESP32-C6-DevKit-Lipo by OLIMEX and Pcb dataset lite by EasyGerber.

The TP4054-42-SOT25-R in open source designs

The gallery holds 32 open source boards using the TP4054-42-SOT25-R from 7 GitHub repositories; a typical one measures about 75.2 × 74.7 mm and carries around 145 components.

94% are two-layer designs, the rest use four layers or more, and 91% carry an open source license.

The most starred is ESP32-EVB Rev K1 by OLIMEX.

Microcontrollers on boards using the TP4054-42-SOT25-R

TP4054-42-SOT25-R: common questions

Where can I find a TP4054-42-SOT25-R reference design?

Each of the 32 boards on this page is a real design using the TP4054-42-SOT25-R. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TP4054-42-SOT25-R VCC pin?

The VCC pin has a decoupling capacitor on 5 of 7 designs, most often 22 µF (then 47 µF). Counted from the KiCad layouts of 7 open source designs using the TP4054-42-SOT25-R.

What resistor goes on the TP4054-42-SOT25-R PROG pin?

The PROG pin has a resistor to GND on 5 of 7 designs, most often 10 kΩ (then 2 kΩ). Counted from the KiCad layouts of 7 open source designs using the TP4054-42-SOT25-R.

What resistor goes on the TP4054-42-SOT25-R CHRGB pin?

The CHRGB pin has a series resistor on 4 of 7 designs, most often 2.2 kΩ. Counted from the KiCad layouts of 7 open source designs using the TP4054-42-SOT25-R.

What parts are used alongside the TP4054-42-SOT25-R?

The CH340X(MSOP-10), TPS62A02ADRLR(SOT-563-6), BAT54C(SOT23-3), ESP32-WROOM-32E-N4 and HX7027(SOT-23) appear in the most repositories here.

Which microcontrollers do boards using the TP4054-42-SOT25-R use?

Most are built on ESP32 (31) and Nordic nRF (1).

How big is a typical board using the TP4054-42-SOT25-R?

The median is 75.2 × 74.7 mm, and 94% are two-layer designs.

What is the most popular open source board using the TP4054-42-SOT25-R?

By GitHub stars, ESP32-EVB Rev K1 by OLIMEX, with 287 stars.

Can I simulate one of these boards using the TP4054-42-SOT25-R before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part