HardLabs

REV2 SPRING 2022

Olin-Rocketry·sensing·hardware/REV2_SPRING_2022/REV2_SPRING_2022.kicad_pcb

REV2 SPRING 2022 PCB layout, top view — open source NXP board by Olin-Rocketry

About the REV2 SPRING 2022 PCB

REV2 SPRING 2022 is an open source NXP PCB design by Olin-Rocketry, published on GitHub. It is a 2-layer board measuring 105 × 250 mm, with 50 components from 17 distinct parts.

Its main chip is the Teensy3.6_All_Pins, from the NXP family. Other key parts include the PA16165_Breakout, MPL3115A2_Breakout, BNO055_Breakout, RFM69HCW_Breakout and TPS2113ADRBR. By type, the board carries 21 resistors, 7 ICs, 7 capacitors, 6 diodes, 4 connectors and 2 transistors.

It belongs with the rf & radio, sensors and power & battery designs in this gallery.

From the project

Sensing hardware and software

Repository for all Olin Rocketry hardware and firmware.

The purpose of the avionics system is to determine when to deploy the drogue and main chutes, and to send the signal to do so to the recovery system. The flight computer contains several sensors to help detect apogee, and a microcontroller to read and process the data and send the signal.

- a commercial-off-the-shelf (COTS) flight computer; - a student-designed flight computer, which includes sensors, microcontroller, GPS, and radio; and - a student-designed battery management system (BMS).

REV2 SPRING 2022, from the project README
From the project README

Main components on the REV2 SPRING 2022

Teensy3.6_All_PinsPA16165_BreakoutMPL3115A2_BreakoutBNO055_BreakoutRFM69HCW_BreakoutTPS2113ADRBR

REV2 SPRING 2022 bill of materials (BOM)

50 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Teensy3.6_All_Pins
U1
1
PA16165_Breakout
U2
1
MPL3115A2_Breakout
U3
1
BNO055_Breakout
U4
1
RFM69HCW_Breakout
U5
2
TPS2113ADRBR
U201, U301
2
Q_NMOS_GDS
Q101, Q102
4
Screw_Terminal_01x02
J101, J102, J104, J107
2
Battery_Cell
BT101, BT102
1
Buzzer
BZ101
6
LED
D101, D102, D103, D104, D105, D106
7
C_0.1U
C_0.1u
C101, C201, C202, C203, C301, C302, C303
1
R_15K
R_15k
R101
1
R_4.7K
R_4.7k
R102
9
R_10K
R_10k
R103, R109, R110, R111, R112, R114, R115, R202 +1
6
R_750
R104, R105, R106, R107, R108, R113
4
R_200
R201, R203, R301, R303

REV2 SPRING 2022 design files

The KiCad project lives in the Olin-Rocketry/sensing repository on GitHub; these links point at the commit this page was built from.

REV2 SPRING 2022: common questions

What microcontroller does the REV2 SPRING 2022 use?

The REV2 SPRING 2022 is built around the Teensy3.6_All_Pins, from the NXP family.

How big is the REV2 SPRING 2022 PCB?

The REV2 SPRING 2022 measures 105 × 250 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the REV2 SPRING 2022?

50 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the REV2 SPRING 2022 design files?

From the Olin-Rocketry/sensing repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the REV2 SPRING 2022 design in my own project?

The repository has no license, so all rights stay with Olin-Rocketry. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the REV2 SPRING 2022 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in sensing

Similar boards