HardLabs

Qwiic GPS - Titan X1 v10

Olin-Rocketry·sensing·kicad_symbol_libraries/Qwiic GPS - Titan X1 v10.kicad_pcb

Qwiic GPS - Titan X1 v10 PCB layout, top view — open source board by Olin-Rocketry

About the Qwiic GPS - Titan X1 v10 PCB

Qwiic GPS - Titan X1 v10 is an open source PCB design by Olin-Rocketry, published on GitHub. It is a 2-layer board measuring 30.5 × 25.4 mm, with 30 components from 26 distinct parts.

Other key parts include the BNO055 and SPECIAL_INSTRUCTIONS-PRODUCTION. By type, the board carries 8 resistors, 6 connectors, 4 jumpers, 4 capacitors, 2 ICs and 2 diodes.

It belongs with the rf & radio, sensors and power & battery designs in this gallery.

From the project

Sensing hardware and software

Repository for all Olin Rocketry hardware and firmware.

The purpose of the avionics system is to determine when to deploy the drogue and main chutes, and to send the signal to do so to the recovery system. The flight computer contains several sensors to help detect apogee, and a microcontroller to read and process the data and send the signal.

- a commercial-off-the-shelf (COTS) flight computer; - a student-designed flight computer, which includes sensors, microcontroller, GPS, and radio; and - a student-designed battery management system (BMS).

Qwiic GPS - Titan X1 v10, from the project README
From the project README

Main components on the Qwiic GPS - Titan X1 v10

BNO055SPECIAL_INSTRUCTIONS-PRODUCTION

Qwiic GPS - Titan X1 v10 bill of materials (BOM)

30 components, 26 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
BNO055
Titan X1 GPS
U1
1
SPECIAL_INSTRUCTIONS-PRODUCTION
U$3
1
CONN_01X09_FEMALE
U.FL
J1
1
RFM9X_HEADER
Qwiic Right Angle
J2
1
CONN_01X03_MALE
PTH
J3
1
Qwiic Right Angle
J4
1
—
J5
1
—
J7
1
6.8MM_COIN_CELL
B1
1
FRAME-LETTER
FRAME1
1
—
JP1
2
STAND-OFF
JP3, JP4
1
—
JP5
1
BLUE
D1
1
0.5A/40V/420mV
D2
1
600Ohm/100MHz
FB1
1
33nH/±5%/500mA
L1
1
100N
0.1uF
C1
1
6.8N
1.0uF
C2
1
120N
1.0uF
C3
Show 6 more
QtyPartRefs
1
100N
1.0uF
C4
2
10K
10k
R1, R2
1
10K
470
R3
1
1k
R5
2
470
R6, R11
2
4.7k
R7, R8

Qwiic GPS - Titan X1 v10 design files

The KiCad project lives in the Olin-Rocketry/sensing repository on GitHub; these links point at the commit this page was built from.

Qwiic GPS - Titan X1 v10: common questions

How big is the Qwiic GPS - Titan X1 v10 PCB?

The Qwiic GPS - Titan X1 v10 measures 30.5 × 25.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Qwiic GPS - Titan X1 v10?

30 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Qwiic GPS - Titan X1 v10 design files?

From the Olin-Rocketry/sensing repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Qwiic GPS - Titan X1 v10 design in my own project?

The repository has no license, so all rights stay with Olin-Rocketry. Use it as a reference, and ask the author before reusing the design.

More boards in sensing

Similar boards