7 open source boards using the TPS2113ADRBR

Real designs built with the TPS2113ADRBR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the TPS2113ADRBR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS2113ADRBR connects to, and the resistors, capacitors and other passives placed on it.

  • The EN pin is tied to GND on 5 of 5 designs.
  • The ILIM pin has a resistor to GND on 4 of 5 designs, most often 750 Ω (then 250 Ω).
  • The OUT pin has a capacitor to GND on 4 of 5 designs, most often 1 µF (then 100 nF).
  • The IN2 pin is tied to VBAT on 4 of 5 designs.
STATpin 1Connected to: The microcontroller 40% · not connected 40%
  • Pull-up to 5V on 40% · 250 Ω (1), 5.1 kΩ (1)
ENpin 2Connected to: GND 100%
VSNSpin 3Connected to: Signal 60% · GND 40%
  • Resistor to GND on 60% · 820 Ω (1), 1.5 kΩ (1)
  • Pull-up to 5V on 40% · 4.3 kΩ (1), 1.5 kΩ (1)
ILIMpin 4Connected to: Signal 100%
  • Resistor to GND on 80% · 750 Ω (2), 250 Ω (1), 1 kΩ (1)
GNDpin 5Connected to: GND 100%
IN2pin 6Connected to: VBAT 80% · a signal 20%
OUTpin 7Connected to: A connector 40%, TPS73633DBV 40% · 5V 20%
  • Capacitor to GND on 80% · 1 µF (2), 100 nF (1), 4.7 µF (1)
IN1pin 8Connected to: VBUS 80% · a signal 20%
GND_2pin 9Connected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Shirley-FC-Dev-Board by Bare-Metal-Foundry, Ollyfc by rland93, KeyboardPCB by MaprilBear and Keebi by MaprilBear.

The TPS2113ADRBR in open source designs

The gallery holds 7 open source boards using the TPS2113ADRBR from 5 GitHub repositories; a typical one measures about 105 × 100 mm and carries around 101 components.

71% are two-layer designs, the rest use four layers or more, and 14% carry an open source license.

The most starred is Shirley-FC-Dev-Board by Bare-Metal-Foundry.

Microcontrollers on boards using the TPS2113ADRBR

TPS2113ADRBR: common questions

Where can I find a TPS2113ADRBR reference design?

Each of the 7 boards on this page is a real design using the TPS2113ADRBR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPS2113ADRBR EN pin connected?

The EN pin is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TPS2113ADRBR.

What resistor goes on the TPS2113ADRBR ILIM pin?

The ILIM pin has a resistor to GND on 4 of 5 designs, most often 750 Ω (then 250 Ω). Counted from the KiCad layouts of 5 open source designs using the TPS2113ADRBR.

How is the TPS2113ADRBR OUT pin connected?

The OUT pin has a capacitor to GND on 4 of 5 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the TPS2113ADRBR.

What parts are used alongside the TPS2113ADRBR?

The Adafruit ST7735R, BGM220PC22HNA2R, TM4C123GH6PMI7 and TPS73633DBV appear in the most repositories here.

Which microcontrollers do boards using the TPS2113ADRBR use?

Most are built on NXP (3), Silicon Labs (2) and STM32 (2).

How big is a typical board using the TPS2113ADRBR?

The median is 105 × 100 mm, and 71% are two-layer designs.

What is the most popular open source board using the TPS2113ADRBR?

By GitHub stars, Shirley-FC-Dev-Board by Bare-Metal-Foundry, with 31 stars.

Can I simulate one of these boards using the TPS2113ADRBR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part