HardLabs

Newlsm9ds1

Olin-Rocketry·sensing·hardware/MiniAvionics/newlsm9ds1.kicad_pcb

Newlsm9ds1 PCB layout, top view — open source board by Olin-Rocketry

About the Newlsm9ds1 PCB

Newlsm9ds1 is an open source PCB design by Olin-Rocketry, published on GitHub. It is a 2-layer board measuring 13.8 × 19.4 mm, with 17 components from 11 distinct parts.

Other key parts include the LSM9DS1. By type, the board carries 7 resistors, 5 capacitors, 3 diodes, 1 IC and 1 connector.

It belongs with the rf & radio, sensors and power & battery designs in this gallery.

From the project

Sensing hardware and software

Repository for all Olin Rocketry hardware and firmware.

The purpose of the avionics system is to determine when to deploy the drogue and main chutes, and to send the signal to do so to the recovery system. The flight computer contains several sensors to help detect apogee, and a microcontroller to read and process the data and send the signal.

- a commercial-off-the-shelf (COTS) flight computer; - a student-designed flight computer, which includes sensors, microcontroller, GPS, and radio; and - a student-designed battery management system (BMS).

Newlsm9ds1, from the project README
From the project README

Main components on the Newlsm9ds1

LSM9DS1

Newlsm9ds1 bill of materials (BOM)

17 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LSM9DS1
IC1
1
CONN_01X09_FEMALE
826629-4
J1
2
Diode
D1, D2
1
LED
D3
1
100N
0.22uF
C1
1
6.8N
0.01uF
C2
1
120N
100nF
C3
1
100N
10uf
C4
1
22P
100uF
C6
4
10K
10k
R1, R2, R3, R4
3
10k
R5, R6, R7

Newlsm9ds1 design files

The KiCad project lives in the Olin-Rocketry/sensing repository on GitHub; these links point at the commit this page was built from.

Newlsm9ds1: common questions

How big is the Newlsm9ds1 PCB?

The Newlsm9ds1 measures 13.8 × 19.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Newlsm9ds1?

17 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Newlsm9ds1 design files?

From the Olin-Rocketry/sensing repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Newlsm9ds1 design in my own project?

The repository has no license, so all rights stay with Olin-Rocketry. Use it as a reference, and ask the author before reusing the design.

More boards in sensing

Similar boards