HardLabs

Ortho

onisage·megacorp-main·PCBs/Solder/ortho/ortho.kicad_pcb

Ortho PCB layout, top view — open source RP2040/RP2350 board by onisage
Simulate this board

About the Ortho PCB

Ortho is an open source RP2040/RP2350 PCB design by onisage, published on GitHub under the MIT license. It is a 2-layer board measuring 190.5 × 76.2 mm, with 113 components from 21 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q128JVS, XC6206P332MR and SN74LVC1T45DRL. By type, the board carries 38 diodes, 4 ICs, 4 switches, 2 connectors and 1 crystal.

From the project

For all MEGACORP-related projects.

Main components on the Ortho

RP2040W25Q128JVSXC6206P332MRSN74LVC1T45DRL

Ortho bill of materials (BOM)

113 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040
U1
1
W25Q128JVS
U2
1
XC6206P332MR
U3
1
SN74LVC1T45DRL
U4
1
12MHZ
12MHz
Y1
1
SM04B-SRSS-TB(LF)(SN)
J1
1
LED_STRIP
J4
4
1u
C_1V-Decoup1, C_3V-Decoup2, C_LD1, C_LD2
10
100n
C_1V-Decoup2, C_1V-Decoup3, C_3V-Decoup3, C_3V-Decoup4, C_3V-Decoup5, C_3V-Decoup6, C_3V-Decoup7, C_3V-Decoup8 +2
1
10u
C_3V-Decoup1
2
22p
C_Crystal1, C_Crystal2
2
RotaryEncoder_Switch
ENC1, ENC2
36
MX-NoLED
MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 +28
2
MX-NoLED
MX32, MX33
2
1k
R_Crystal1, R_Flash3
2
27
R_DATA1, R_DATA2
3
5k1
R_Flash1, R_Flash2, R_RST1
2
MX_stab
S1, S2
1
RESET
SW1
1
BOOTSEL
SW2
Show 1 more
QtyPartRefs
38
1N4148W
D1, D2, D3, D4, D5, D6, D7, D8 +30

Ortho design files

The KiCad project lives in the onisage/megacorp-main repository on GitHub; these links point at the commit this page was built from.

Ortho: common questions

What microcontroller does the Ortho use?

The Ortho is built around the RP2040, from the RP2040/RP2350 family.

How big is the Ortho PCB?

The Ortho measures 190.5 × 76.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ortho?

113 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Ortho design files?

From the onisage/megacorp-main repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Ortho design in my own project?

Yes, under the terms of its MIT license, which onisage chose for the repository.

Can I test firmware for the Ortho without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in megacorp-main

Similar boards