HardLabs

Ortho hs

onisage·megacorp-main·PCBs/Hotswap/ortho_hs/ortho_hs.kicad_pcb

Ortho hs PCB layout, top view — open source RP2040/RP2350 board by onisage

About the Ortho hs PCB

Ortho hs is an open source RP2040/RP2350 PCB design by onisage, published on GitHub under the MIT license. It is a 2-layer board measuring 190.5 × 76.2 mm, with 113 components from 20 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q128JVS, XC6206P332MR and SN74LVC1T45DRL. By type, the board carries 38 diodes, 4 ICs, 4 switches, 2 connectors and 1 crystal.

From the project

For all MEGACORP-related projects.

Main components on the Ortho hs

RP2040W25Q128JVSXC6206P332MRSN74LVC1T45DRL

Ortho hs bill of materials (BOM)

113 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040
U1
1
W25Q128JVS
U2
1
XC6206P332MR
U3
1
SN74LVC1T45DRL
U4
1
12MHZ
12MHz
Y1
1
SM04B-SRSS-TB(LF)(SN)
J1
1
LED_STRIP
J4
4
1u
C_1V-Decoup1, C_3V-Decoup2, C_LD1, C_LD2
10
100n
C_1V-Decoup2, C_1V-Decoup3, C_3V-Decoup3, C_3V-Decoup4, C_3V-Decoup5, C_3V-Decoup6, C_3V-Decoup7, C_3V-Decoup8 +2
1
10u
C_3V-Decoup1
2
22p
C_Crystal1, C_Crystal2
2
RotaryEncoder_Switch
ENC1, ENC2
38
MX-NoLED
MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 +30
2
1k
R_Crystal1, R_Flash3
2
27
R_DATA1, R_DATA2
3
5k1
R_Flash1, R_Flash2, R_RST1
2
MX_stab
S1, S2
1
RESET
SW1
1
BOOTSEL
SW2
38
1N4148W
D1, D2, D3, D4, D5, D6, D7, D8 +30

Ortho hs design files

The KiCad project lives in the onisage/megacorp-main repository on GitHub; these links point at the commit this page was built from.

Ortho hs: common questions

What microcontroller does the Ortho hs use?

The Ortho hs is built around the RP2040, from the RP2040/RP2350 family.

How big is the Ortho hs PCB?

The Ortho hs measures 190.5 × 76.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ortho hs?

113 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Ortho hs design files?

From the onisage/megacorp-main repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Ortho hs design in my own project?

Yes, under the terms of its MIT license, which onisage chose for the repository.

Can I test firmware for the Ortho hs without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in megacorp-main

Similar boards