Big sammy
openinput-fw·big-sammy·pcb/big-sammy.kicad_pcb
About the Big sammy PCB
Big sammy is an open source Microchip SAM PCB design by openinput-fw, published on GitHub under the CERN-OHL-P-2.0 license. It is a 4-layer board measuring 25 × 45 mm, with 60 components from 31 distinct parts.
Its main chip is the ATSAMS70J19B-M, from the Microchip SAM family. Other key parts include the USBLC6-2SC6, MIC5504-3.3YM5, MIC5504-1.8YM5, PMW3360DM-T2QU and 25LCxxx. By type, the board carries 26 capacitors, 14 resistors, 7 ICs, 7 connectors, 3 inductors and 1 crystal.
From the project
Open source wired mouse hardware
Main components on the Big sammy
Big sammy bill of materials (BOM)
60 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-23-6 | U1 |
| 1 | MIC5504-3.3YM5 | SOT-23-5 | U2 |
| 1 | MIC5504-1.8YM5 | SOT-23-5 | U3 |
| 1 | ATSAMS70J19B-M | QFN-64-1EP_9x9mm_P0.5mm_EP7.65x7.65mm | U4 |
| 1 | PMW3360DM-T2QU | PMW3360 | U5 |
| 1 | 25LCxxx | DFN-S-8-1EP_6x5mm_P1.27mm | U6 |
| 1 | 74LVC1G17 | SOT-353_SC-70-5 | U7 |
| 1 | 12MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB | JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J1 |
| 1 | SWD | Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J2 |
| 1 | Enc | JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J3 |
| 1 | Side | JST_SH_BM05B-SRSS-TB_1x05-1MP_P1.00mm_Vertical | J4 |
| 1 | LSW | JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J5 |
| 1 | RSW | JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J6 |
| 1 | MSW | JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J7 |
| 1 | 500mA | Fuse_0603_1608Metric_Castellated | F1 |
| 1 | ~ | ws2812-2020 | D1 |
| 1 | 470R | L_0402_1005Metric | FB1 |
| 1 | ~ | L_0402_1005Metric | FB2 |
| 1 | 10uH | L_0402_1005Metric | L1 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 15 | 100nF | C_0402_1005Metric | C1, C3, C4, C7, C8, C9, C10, C11 +7 |
| 5 | 1uF | C_0603_1608Metric | C16, C17, C22, C23, C24 |
| 2 | 4.7uF | C_0603_1608Metric | C19, C20 |
| 2 | 12pF | C_0402_1005Metric | C25, C27 |
| 1 | 10pF | C_0402_1005Metric | C26 |
| 1 | 4.7nF | C_0402_1005Metric | C29 |
| 9 | 100k | R_0402_1005Metric | R1, R5, R6, R7, R8, R9, R10, R12 +1 |
| 2 | 2.2R | R_0402_1005Metric | R2, R11 |
| 1 | 10k | R_0402_1005Metric | R3 |
| 1 | 5.62k | R_0402_1005Metric | R4 |
| 1 | 100 | R_0402_1005Metric | R14 |
Big sammy design files
The KiCad project lives in the openinput-fw/big-sammy repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/big-sammy.kicad_pcb
- Schematicpcb/big-sammy.kicad_sch
Big sammy: common questions
What microcontroller does the Big sammy use?
The Big sammy is built around the ATSAMS70J19B-M, from the Microchip SAM family.
How big is the Big sammy PCB?
The Big sammy measures 25 × 45 mm, has 4 copper layers and is 0.824 mm thick.
How many components are on the Big sammy?
60 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the Big sammy design files?
From the openinput-fw/big-sammy repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Big sammy design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which openinput-fw chose for the repository.
Can I test firmware for the Big sammy without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416