30 open source boards using the SC0914(13)
Real designs built with the SC0914(13), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
PD240W
theohg
66 × 66 mm213 parts6LCC-BY-NC-4.0125RP2040/RP2350
Riotee Board
NessieCircuits
55.9 × 22.9 mm80 parts4LCERN-OHL-W-2.015RP2040/RP2350
Gemini
0xCB-dev
18 × 23.3 mm50 parts4LCustom license11RP2040/RP2350
Spasics
psychogenic
45 × 30 mm66 parts4LGPL-3.010RP2040/RP2350
Master board
roboryman
156 × 156 mm66 parts2LMIT9RP2040/RP2350
BMS
AerospaceNU
100 × 100 mm342 parts6LNo license4RP2040/RP2350
Chipignite discover
efabless
53.5 × 65.5 mm139 parts4LApache-2.02RP2040/RP2350
Greyhound main
mole99
84 × 78 mm106 parts4LApache-2.02RP2040/RP2350
Waferspace main
mole99
84 × 78 mm105 parts4LApache-2.02RP2040/RP2350
TemperatureSensor
PolygonHJ
65 × 52.5 mm78 parts4LMIT2RP2040/RP2350
Ephys test board
open-ephys
150 × 120 mm542 parts4LCustom license1RP2040/RP2350
Robot
oist
80 × 70 mm336 parts4LApache-2.01RP2040/RP2350
Mad RP2040
Cimos
77.2 × 86.4 mm102 parts4LMIT1RP2040/RP2350
Card debug board-3
oresat
54 × 64 mm78 parts4LNo license1RP2040/RP2350
Avionics Tutorial 50x50mm Example Board
UC-Aerospace
50 × 50 mm55 parts2LNo license1RP2040/RP2350
Rp2040-timer
smaroukis
100 × 100 mm154 parts4LMIT0RP2040/RP2350
Kicad demos tiny tapeout
circuitly
104.5 × 81 mm131 parts4LApache-2.00RP2040/RP2350
Tiny tapeout
nickradfc
104.5 × 81 mm131 parts4LCustom license0RP2040/RP2350
Phyduino pico
perc-sw
68.6 × 53.3 mm124 parts4LGPL-3.00Tmc5160-usb
janelia-kicad
40 × 40 mm94 parts4LNo license0RP2040/RP2350
ThumbMuncher
Alsa2
52 × 51 mm82 parts4LNo license0RP2040/RP2350
TimeCapsule
jaxfry
50 × 70 mm51 parts2LNo license0RP2040/RP2350
KeyShare
MainRam1
76 × 93 mm37 parts2LMIT0- schematic only · 414 partsRP2040/RP2350
Umiko
idorurez
414 partsNo license0 RP2040/RP2350
HandyWork 5x3 + Mods + Nav
AxelVoitier
283.2 × 131.5 mm48 parts4LNo license70RP2040/RP2350
Gemini panel
0xCB-dev
112 × 70.6 mm50 parts4LCustom license11RP2040/RP2350
RP2040 Minimal Design Example
oist
52 × 51 mm30 parts2LApache-2.01RP2040/RP2350
TinyTapeout 4+ Demoboard
claynicholson
104.5 × 81 mm131 parts4LMIT102RP2040/RP2350
TinyTapeout 4+ Demoboard
nickradfc
104.5 × 81 mm131 parts4LNo license0RP2040/RP2350
Example
EthanKahn08
55 × 30 mm60 parts4LNo license0
How designs wire the SC0914(13)
Read from the KiCad layouts of 27 open source designs, one per repository: what each pin of the SC0914(13) connects to, and the resistors, capacitors and other passives placed on it.
- The IOVDD pins have a decoupling capacitor on 27 of 27 designs, most often 100 nF (then 1 µF).
- The DVDD pins have a decoupling capacitor on 27 of 27 designs, most often 100 nF (then 1 µF).
- The VREG_VOUT pin has a decoupling capacitor on 27 of 27 designs, most often 100 nF (then 1 µF).
- The XIN pin has a crystal on 26 of 27 designs, most often 12 MHz.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| IOVDDpin 1, 10, 22, 33, 42, 49 | Connected to: 3.3V 96% |
|
| GPIO1pin 3 | Connected to: A connector 37% · not connected 26% |
|
| TESTENpin 19 | Connected to: GND 96% | — |
| XINpin 20 | Connected to: Signal 100% |
|
| XOUTpin 21 | Connected to: Signal 96% |
|
| DVDDpin 23, 50 | Connected to: 1.1V 85% |
|
| RUNpin 26 | Connected to: A connector 44% |
|
| ADC_AVDDpin 43 | Connected to: 3.3V 93% |
|
| VREG_INpin 44 | Connected to: 3.3V 96% |
|
| VREG_VOUTpin 45 | Connected to: 1.1V 85% |
|
| USB_DMpin 46 | Connected to: A connector 30% |
|
| USB_DPpin 47 | Connected to: A connector 30% |
|
| USB_VDDpin 48 | Connected to: 3.3V 96% |
|
| QSPI_SSpin 56 | Connected to: W25Q32JVSSIQ 30%, a connector 30% |
|
| GNDpin 57 | Connected to: GND 100% | — |
36 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PD240W by theohg, TinyTapeout 4+ Demoboard by claynicholson, HandyWork 5x3 + Mods + Nav by AxelVoitier and Riotee Board by NessieCircuits.
The SC0914(13) in open source designs
The gallery holds 30 open source boards using the SC0914(13) from 28 GitHub repositories; a typical one measures about 76 × 70 mm and carries around 98 components.
83% use four copper layers or more, and 50% carry an open source license.
The most starred is PD240W by theohg.
Parts used alongside the SC0914(13)
Microcontrollers on boards using the SC0914(13)
What boards using the SC0914(13) are built for
SC0914(13): common questions
Where can I find a SC0914(13) reference design?
Each of the 30 boards on this page is a real design using the SC0914(13). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SC0914(13) IOVDD pin?
The IOVDD pins have a decoupling capacitor on 27 of 27 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 27 open source designs using the SC0914(13).
What decoupling capacitors do designs use on the SC0914(13) DVDD pin?
The DVDD pins have a decoupling capacitor on 27 of 27 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 27 open source designs using the SC0914(13).
What decoupling capacitors do designs use on the SC0914(13) VREG_VOUT pin?
The VREG_VOUT pin has a decoupling capacitor on 27 of 27 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 27 open source designs using the SC0914(13).
What parts are used alongside the SC0914(13)?
The TLV1117LV33DCYR, W25Q32JVSSIQ, 157112V12700, 74CBTLV3257PW,118 and AP2112K-1.8TRG1 appear in the most repositories here.
Which microcontrollers do boards using the SC0914(13) use?
Most are built on RP2040/RP2350 (29).
How big is a typical board using the SC0914(13)?
The median is 76 × 70 mm, and 17% are two-layer designs.
What is the most popular open source board using the SC0914(13)?
By GitHub stars, PD240W by theohg, with 125 stars.
Can I simulate one of these boards using the SC0914(13) before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.