02 11 26

OSHE-Github·Plant-Saver·Plant_Saver_Spring_2026/Plant_Saver_Kicad_V2/PCB_Backups/02_11_26.kicad_pcb

02 11 26 PCB layout, top view — open source ESP32 board by OSHE-Github

About the 02 11 26 PCB

02 11 26 is an open source ESP32 PCB design by OSHE-Github, published on GitHub. It is a 2-layer board measuring 196 × 190 mm, with 100 components from 45 distinct parts.

Its main chip is the ESP32-WROOM-32E-N16, from the ESP32 family. Other key parts include the CDBA140SL-HF, DW03C, LP38511TJ-ADJ/NOPB, MCP73833-xxx-UN and MCP6234. By type, the board carries 41 resistors, 16 capacitors, 14 ICs, 12 transistors, 9 connectors and 4 switches.

It belongs with the power & battery and sensors designs in this gallery.

From the project

These goals were largely met in the current iteration of the project, although there is still room for improvement. Device electronics were condensed down to a single primary board with the DHT20, capacitive soil sensor, display, and other interface elements being connected via c

These goals were largely met in the current iteration of the project, although there is still room for improvement. Device electronics were condensed down to a single primary board with the DHT20, capacitive soil sensor, display, and other interface elements being connected via cables due to the need for flexible positioning. A 3D-printed enclosure was designed and produced out of PETG filament to house these electronics. This housing is compact, fitting easily into medium to large pots, and features dedicated ports for all externally accessible components which are sealed to prevent water…

02 11 26, from the project README
From the project README

Main components on the 02 11 26

CDBA140SL-HFESP32-WROOM-32E-N16DW03CLP38511TJ-ADJ/NOPBMCP73833-xxx-UNMCP6234MCP6547T_I_MS

02 11 26 bill of materials (BOM)

100 components, 45 distinct parts.

QtyPartRefs
6
CDBA140SL-HF
U1, U2, U3, U4, U9, U11
1
ESP32-WROOM-32E-N16
U5
1
~
U6
1
DW03C
U10
1
LP38511TJ-ADJ/NOPB
U12
2
MCP73833-xxx-UN
U13, U15
1
MCP6234
U14
1
MCP6547T_I_MS
U16
10
G09P02L
Q1, Q2, Q4, Q5, Q6, Q7, Q8, Q9 +2
2
ISP12DP06NMXTSA1
Q3, Q11
1
SBH11-PBPC-D05-ST-BK
J2
1
SM04B-SRSS-TB
J3
1
Conn_01x02_Pin
J5
1
Conn_01x06_Socket
J6
1
S3B-PH-K-S
J7
1
54-00284
J8
1
1.25mm
J9
1
DM3D-SF
J10
1
Test
J11
4
Solar_Cell
SC1, SC2, SC3, SC4
Show 25 more
QtyPartRefs
1
Reset
SW1
1
25336NA
SW2
1
Boot
SW3
1
SA72SB0
SW4
5
0.1uF
C1, C4, C10, C15, C16
4
10uF
C2, C6, C7, C9
5
1uF
C3, C5, C11, C12, C13
1
1nF
C8
1
4.7uF
C14
10
10K
R1, R4, R18, R19, R20, R21, R22, R23 +2
3
100K
R2, R13, R15
2
150K
R3, R7
2
5.1K
R5, R6
4
200K
R8, R11, R42, R43
2
NTCLE317E4103SBA
R9, R10
1
1K
R14
1
1K
R16
1
5.6K
R17
1
20K
R24
5
205K
R28, R29, R30, R31, R40
5
301K
R32, R33, R34, R35, R41
1
3.6K
R36
1
22.1K
R37
1
71.5K
R38
1
402K
R39

02 11 26 design files

The KiCad project lives in the OSHE-Github/Plant-Saver repository on GitHub; these links point at the commit this page was built from.

02 11 26: common questions

What microcontroller does the 02 11 26 use?

The 02 11 26 is built around the ESP32-WROOM-32E-N16, from the ESP32 family.

How big is the 02 11 26 PCB?

The 02 11 26 measures 196 × 190 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 02 11 26?

100 components, from 45 distinct parts. The full bill of materials is listed on this page.

Where can I download the 02 11 26 design files?

From the OSHE-Github/Plant-Saver repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the 02 11 26 design in my own project?

The repository has no license, so all rights stay with OSHE-Github. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the 02 11 26 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Plant-Saver

Similar boards