6 open source boards using the DW03C

Real designs built with the DW03C, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

The DW03C in open source designs

The gallery holds 6 open source boards using the DW03C from 4 GitHub repositories; a typical one measures about 86 × 77 mm and carries around 75 components.

67% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is LSwarm-Anchor by DerpyDoggo11.

Microcontrollers on boards using the DW03C

DW03C: common questions

Where can I find a DW03C reference design?

Each of the 6 boards on this page is a real design using the DW03C. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the DW03C?

The AP2112K-3.3, BQ24075RGTR and ESP32-C3-MINI-1U-N4 appear in the most repositories here.

Which microcontrollers do boards using the DW03C use?

Most are built on ESP32 (5).

How big is a typical board using the DW03C?

The median is 86 × 77 mm, and 67% are two-layer designs.

What is the most popular open source board using the DW03C?

By GitHub stars, LSwarm-Anchor by DerpyDoggo11, with 1 stars.

Can I simulate one of these boards using the DW03C before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part