02 13 26
OSHE-Github·Plant-Saver·Plant_Saver_Spring_2026/Plant_Saver_Kicad_V2/PCB_Backups/02_13_26.kicad_pcb
About the 02 13 26 PCB
02 13 26 is an open source ESP32 PCB design by OSHE-Github, published on GitHub. It is a 2-layer board measuring 80.5 × 84 mm, with 101 components from 45 distinct parts.
Its main chip is the ESP32-WROOM-32E-N16, from the ESP32 family. Other key parts include the CDBA140SL-HF, DW03C, LP38511TJ-ADJ/NOPB, MCP73833-xxx-UN and MCP6234. By type, the board carries 42 resistors, 16 capacitors, 14 ICs, 12 transistors, 9 connectors and 4 switches.
It belongs with the power & battery and sensors designs in this gallery.
From the project
These goals were largely met in the current iteration of the project, although there is still room for improvement. Device electronics were condensed down to a single primary board with the DHT20, capacitive soil sensor, display, and other interface elements being connected via c
These goals were largely met in the current iteration of the project, although there is still room for improvement. Device electronics were condensed down to a single primary board with the DHT20, capacitive soil sensor, display, and other interface elements being connected via cables due to the need for flexible positioning. A 3D-printed enclosure was designed and produced out of PETG filament to house these electronics. This housing is compact, fitting easily into medium to large pots, and features dedicated ports for all externally accessible components which are sealed to prevent water…

Main components on the 02 13 26
02 13 26 bill of materials (BOM)
101 components, 45 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | CDBA140SL-HF | CDBA-HF | U1, U2, U3, U4, U9, U11 |
| 1 | ESP32-WROOM-32E-N16 | ESP32WROOM32E_EXP | U5 |
| 1 | ~ | R_Array_SIP4 | U6 |
| 1 | DW03C | SOT-23-5_HandSoldering | U10 |
| 1 | LP38511TJ-ADJ/NOPB | TJ5A_TEX | U12 |
| 2 | MCP73833-xxx-UN | MSOP-10_3x3mm_P0.5mm | U13, U15 |
| 1 | MCP6234 | PDIP14_300MC_MCH | U14 |
| 1 | MCP6547T_I_MS | MSOP8_MC_MCH | U16 |
| 10 | G09P02L | TSOT-23 | Q1, Q2, Q4, Q5, Q6, Q7, Q8, Q9 +2 |
| 2 | ISP12DP06NMXTSA1 | PG-SOT223-4_INF | Q3, Q11 |
| 1 | SBH11-PBPC-D05-ST-BK | CONN_SBH11-PBPC-D05-ST-BK_SUL | J2 |
| 1 | Test | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | SM04B-SRSS-TB | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J4 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Conn_01x06_Socket | PinSocket_1x06_P2.54mm_Vertical | J7 |
| 1 | S3B-PH-K-S | JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J8 |
| 1 | 54-00284 | TENSILITY_54-00284 | J9 |
| 1 | 1.25mm | CONN02_530470210_MOL | J10 |
| 1 | DM3D-SF | HRS_DM3D-SF | J11 |
| 4 | Solar_Cell | C_Disc_D7.0mm_W2.5mm_P5.00mm | SC1, SC2, SC3, SC4 |
Show 25 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Reset | SW_PUSH_6mm | SW1 |
| 1 | 1101M2S3AQE2 | SPDT-1101M2_CNK | SW2 |
| 1 | Boot | SW_PUSH_6mm | SW3 |
| 1 | SA72SB0 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | SW4 |
| 5 | 0.1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C4, C10, C13, C16 |
| 4 | 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C6, C7, C9 |
| 5 | 1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C5, C11, C12, C14 |
| 1 | 1nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8 |
| 1 | 4.7uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C15 |
| 11 | 10K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R4, R5, R6, R19, R20, R21, R22 +3 |
| 3 | 100K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R14, R16 |
| 2 | 150K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R9 |
| 2 | 5.1K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7, R8 |
| 4 | 200K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10, R13, R44, R45 |
| 2 | NTCLE317E4103SBA | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11, R12 |
| 1 | 1K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R15 |
| 1 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R17 |
| 1 | 5.6K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R18 |
| 1 | 20K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R26 |
| 5 | 205K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R30, R31, R32, R33, R42 |
| 5 | 301K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R34, R35, R36, R37, R43 |
| 1 | 3.6K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R38 |
| 1 | 22.1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R39 |
| 1 | 71.5K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R40 |
| 1 | 402K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R41 |
02 13 26 design files
The KiCad project lives in the OSHE-Github/Plant-Saver repository on GitHub; these links point at the commit this page was built from.
02 13 26: common questions
What microcontroller does the 02 13 26 use?
The 02 13 26 is built around the ESP32-WROOM-32E-N16, from the ESP32 family.
How big is the 02 13 26 PCB?
The 02 13 26 measures 80.5 × 84 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 02 13 26?
101 components, from 45 distinct parts. The full bill of materials is listed on this page.
Where can I download the 02 13 26 design files?
From the OSHE-Github/Plant-Saver repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the 02 13 26 design in my own project?
The repository has no license, so all rights stay with OSHE-Github. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 02 13 26 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Plant-Saver
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k