Plant Saver Kicad V2
OSHE-Github·Plant-Saver·Plant_Saver_Spring_2026/Plant_Saver_Kicad_V2/Plant_Saver_Kicad_V2.kicad_pcb
About the Plant Saver Kicad V2 PCB
Plant Saver Kicad V2 is an open source ESP32 PCB design by OSHE-Github, published on GitHub. It is a 2-layer board measuring 82 × 85 mm, with 97 components from 43 distinct parts.
Its main chip is the ESP32-WROOM-32E-N16, from the ESP32 family. Other key parts include the CDBA140SL-HF, VS_10BQ015HM3_5BT, DW03C, MCP73833-xxx-UN and MCP6234. By type, the board carries 39 resistors, 15 ICs, 15 capacitors, 12 transistors, 8 connectors and 2 switches.
It belongs with the power & battery and sensors designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
These goals were largely met in the current iteration of the project, although there is still room for improvement. Device electronics were condensed down to a single primary board with the DHT20, capacitive soil sensor, display, and other interface elements being connected via c
These goals were largely met in the current iteration of the project, although there is still room for improvement. Device electronics were condensed down to a single primary board with the DHT20, capacitive soil sensor, display, and other interface elements being connected via cables due to the need for flexible positioning. A 3D-printed enclosure was designed and produced out of PETG filament to house these electronics. This housing is compact, fitting easily into medium to large pots, and features dedicated ports for all externally accessible components which are sealed to prevent water…

Main components on the Plant Saver Kicad V2
Plant Saver Kicad V2 bill of materials (BOM)
97 components, 43 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | CDBA140SL-HF | CDBA-HF | U1, U2, U3, U4 |
| 1 | ESP32-WROOM-32E-N16 | ESP32WROOM32E_EXP | U5 |
| 1 | ~ | R_Array_SIP4 | U6 |
| 2 | VS_10BQ015HM3_5BT | CR_SMBDO-214AA_VIS | U9, U11 |
| 1 | DW03C | DW03C | U10 |
| 2 | MCP73833-xxx-UN | MSOP-10_3x3mm_P0.5mm | U13, U15 |
| 1 | MCP6234 | PDIP14_300MC_MCH | U14 |
| 1 | MCP6547T_I_MS | MSOP8_MC_MCH | U16 |
| 1 | LM66100DCK | SOT-363_SC-70-6 | U17 |
| 1 | XC6210A332PR-G | SOT-89-5_Handsoldering | U18 |
| 10 | G09P02L | TSOT-23 | Q1, Q2, Q4, Q5, Q6, Q7, Q8, Q9 +2 |
| 2 | ISP12DP06NMXTSA1 | PG-SOT223-4_INF | Q3, Q11 |
| 1 | SBH11-PBPC-D05-ST-BK | CONN_SBH11-PBPC-D05-ST-BK_SUL | J2 |
| 1 | SM04B-SRSS-TB | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J4 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Conn_01x06_Socket | PinSocket_1x06_P2.54mm_Vertical | J7 |
| 1 | S3B-PH-K-S | JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J8 |
| 1 | 54-00284 | TENSILITY_54-00284 | J9 |
| 1 | 1.25mm | CONN02_530470210_MOL | J10 |
| 1 | DM3D-SF | HRS_DM3D-SF | J11 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Boot | SW_PUSH_6mm | Boot1 |
| 1 | Reset | SW_PUSH_6mm | Res1 |
| 4 | Solar_Cell | C_Disc_D7.0mm_W2.5mm_P5.00mm | SC1, SC2, SC3, SC4 |
| 1 | 1101M2S3AQE2 | SPDT-1101M2_CNK | SW2 |
| 1 | SA72SB0 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | SW4 |
| 5 | 0.1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C4, C10, C13, C16 |
| 2 | 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C9 |
| 7 | 1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C5, C11, C12, C14, C17, C18 |
| 1 | 4.7uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C15 |
| 11 | 10K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R4, R5, R6, R19, R20, R21, R22 +3 |
| 2 | 100K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R14 |
| 2 | 150K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R9 |
| 2 | 5.1K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7, R8 |
| 4 | 200K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10, R13, R44, R45 |
| 2 | NTCLE317E4103SBA | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11, R12 |
| 1 | 100 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R15 |
| 1 | 20K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R26 |
| 5 | 205K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R30, R31, R32, R33, R42 |
| 5 | 301K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R34, R35, R36, R37, R43 |
| 1 | 3.6K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R38 |
| 1 | 22.1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R39 |
| 1 | 71.5K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R40 |
| 1 | 402K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R41 |
Plant Saver Kicad V2 design files
The KiCad project lives in the OSHE-Github/Plant-Saver repository on GitHub; these links point at the commit this page was built from.
Plant Saver Kicad V2: common questions
What microcontroller does the Plant Saver Kicad V2 use?
The Plant Saver Kicad V2 is built around the ESP32-WROOM-32E-N16, from the ESP32 family.
How big is the Plant Saver Kicad V2 PCB?
The Plant Saver Kicad V2 measures 82 × 85 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Plant Saver Kicad V2?
97 components, from 43 distinct parts. The full bill of materials is listed on this page.
Where can I download the Plant Saver Kicad V2 design files?
From the OSHE-Github/Plant-Saver repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Plant Saver Kicad V2 design in my own project?
The repository has no license, so all rights stay with OSHE-Github. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Plant Saver Kicad V2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Plant-Saver
Earlier revisions in the repo: Plant_Saver_Kicad
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k