Thinkpad-Mod

Outdatedcandy92·Thinkpad-Mod·PCB/Thinkpad_RGB.kicad_pcb

Thinkpad-Mod PCB layout, top view — open source Microchip SAM board by Outdatedcandy92

About the Thinkpad-Mod PCB

Thinkpad-Mod is an open source Microchip SAM PCB design by Outdatedcandy92, published on GitHub under the CERN-OHL-W-2.0 license. It is a 4-layer board measuring 17.1 × 21.4 mm, with 40 components from 21 distinct parts.

Its main chip is the ATSAMD21E18A-M, from the Microchip SAM family. Other key parts include the TLV75533PDQNR, TMP112XXDRL, TMAG5273A1QDBVR and LSM303AGRTR. By type, the board carries 15 capacitors, 11 resistors, 5 ICs, 2 connectors, 2 switches and 2 diodes.

From the project

A small board that I designed to be embedded inside my Thinkpad X1 Carbon Gen 7 laptop. It features a MCU on board along with a ton of sensors for data logging and an RGB led placed to shine on the red dot that's on the Thinkpad Logo.

A small board that I designed to be embedded inside my Thinkpad X1 Carbon Gen 7 laptop. It features a MCU on board along with a ton of sensors for data logging and an RGB led placed to shine on the red dot that's on the Thinkpad Logo.

The project's KiCad files can be found under /PCB/kicad.

This project is licensed under the CERN Open Hardware Licence Version 2 Weakly Reciprocal (CERN OHL W)

Thinkpad-Mod, from the project README
From the project README

Main components on the Thinkpad-Mod

Thinkpad-Mod bill of materials (BOM)

40 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATSAMD21E18A-M
U1
1
TLV75533PDQNR
U2
1
TMP112XXDRL
TMP112xxDRL
U3
1
TMAG5273A1QDBVR
U4
1
LSM303AGRTR
U5
1
Vibration Motor
M1
1
NMOS
Q1
1
USB
J1
1
CONN_01X02_SOCKET
Conn_01x02_Socket
J2
1
SW_Push
SW1
1
Vibration Sensor (NO switch)
SW2
1
XL-3806RGBC-4L
LED1
2
BAT54L-TP
D1, D2
7
100NF
100nF
C1, C5, C6, C10, C11, C13, C14
6
1UF
1uF
C2, C3, C4, C7, C8, C9
1
220NF
220nF
C12
1
10UF
10uF
C15
2
10K
R1, R5
3
470
R2, R3, R4
5
5K
R6, R9, R12, R13, R14
Show 1 more
QtyPartRefs
1
220
R7

Thinkpad-Mod design files

The KiCad project lives in the Outdatedcandy92/Thinkpad-Mod repository on GitHub; these links point at the commit this page was built from.

Thinkpad-Mod: common questions

What microcontroller does the Thinkpad-Mod use?

The Thinkpad-Mod is built around the ATSAMD21E18A-M, from the Microchip SAM family.

How big is the Thinkpad-Mod PCB?

The Thinkpad-Mod measures 17.1 × 21.4 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Thinkpad-Mod?

40 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Thinkpad-Mod design files?

From the Outdatedcandy92/Thinkpad-Mod repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Thinkpad-Mod design in my own project?

Yes, under the terms of its CERN-OHL-W-2.0 license, which Outdatedcandy92 chose for the repository.

Can I test firmware for the Thinkpad-Mod without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.

Similar boards