5 open source boards using the LSM303AGRTR

Real designs built with the LSM303AGRTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the LSM303AGRTR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LSM303AGRTR connects to, and the resistors, capacitors and other passives placed on it.

  • The C1 pin has a capacitor to GND on 5 of 5 designs, most often 220 nF (then 100 nF).
  • The VDD pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF).
  • The VDD_IO pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF).
  • The SCL/SPC pin has a pull-up to 3.3V on 4 of 5 designs, most often 10 kΩ (then 3.3 kΩ).
SCL/SPCpin 1Connected to: The microcontroller 60%
  • Pull-up to 3.3V on 80% · 10 kΩ (2), 3.3 kΩ (1), 5 kΩ (1)
CS_XLpin 2Connected to: 3.3V 80% · a signal 20%
CS_MAGpin 3Connected to: 3.3V 80% · a signal 20%
SDA/SDI/SDOpin 4Connected to: The microcontroller 60%
  • Pull-up to 3.3V on 80% · 10 kΩ (2), 3.3 kΩ (1), 5 kΩ (1)
C1pin 5Connected to: Signal 100%
  • Capacitor to GND on 100% · 220 nF (4), 100 nF (1)
GNDpin 6Connected to: GND 100%
GND_2pin 8Connected to: GND 100%
VDDpin 9Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (11), 10 µF (2), 10 nF (1)
VDD_IOpin 10Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (11), 10 µF (2), 10 nF (1)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PanelGalexy250630 0 by NTURacingTeam, ADCS-Camera-Payload-Board by NortheasternSatelliteLab, Boardoza LSM303 Triple Axis Accelerometer Magnetometer Breakout Board by Boardoza and Aurora-Watch by CooperW824.

The LSM303AGRTR in open source designs

The gallery holds 5 open source boards using the LSM303AGRTR from 5 GitHub repositories; a typical one measures about 36 × 36 mm and carries around 79 components.

80% use four copper layers or more, and 60% carry an open source license.

The most starred is PanelGalexy250630 0 by NTURacingTeam.

Microcontrollers on boards using the LSM303AGRTR

LSM303AGRTR: common questions

Where can I find a LSM303AGRTR reference design?

Each of the 5 boards on this page is a real design using the LSM303AGRTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LSM303AGRTR C1 pin connected?

The C1 pin has a capacitor to GND on 5 of 5 designs, most often 220 nF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the LSM303AGRTR.

What decoupling capacitors do designs use on the LSM303AGRTR VDD pin?

The VDD pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the LSM303AGRTR.

What decoupling capacitors do designs use on the LSM303AGRTR VDD_IO pin?

The VDD_IO pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the LSM303AGRTR.

Which microcontrollers do boards using the LSM303AGRTR use?

Most are built on NXP (1), Microchip SAM (1) and STM32 (1).

How big is a typical board using the LSM303AGRTR?

The median is 36 × 36 mm, and 20% are two-layer designs.

What is the most popular open source board using the LSM303AGRTR?

By GitHub stars, PanelGalexy250630 0 by NTURacingTeam, with 4 stars.

Can I simulate one of these boards using the LSM303AGRTR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part