22 open source boards using the TLV75533PDQNR
Real designs built with the TLV75533PDQNR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Gemini
0xCB-dev
18 × 23.3 mm50 parts4LCustom license111026-RPi-Power-Hat
wilsondr9999
85 × 56.5 mm121 parts4LCC-BY-SA-4.09RP2040/RP2350
Pcb
0xCB-dev
305.1 × 95.5 mm228 parts2LCustom license5ESP32
OpenRX-Gemini
OpenDrone-hw
17 × 15.7 mm85 parts6LCERN-OHL-S-2.03ESP32
OpenRX-Mono
OpenDrone-hw
10 × 17.3 mm61 parts6LCERN-OHL-S-2.02ESP32
OpenRX-Lite
OpenDrone-hw
10 × 11.5 mm47 parts6LCERN-OHL-S-2.02ESP32
DrikrAIO
tetraethylmethane
50 × 50 mm339 parts6LNo license1ESP32
OpenRX-Lite-UFL
OpenDrone-hw
10 × 11.5 mm47 parts6LCERN-OHL-S-2.01ESP32
OpenRX-all
yasir-shahzad
64.2 × 16.3 mm240 parts6LCERN-OHL-S-2.00ESP32
Nano24-elrs receiver
aprskalo1
13 × 11.1 mm41 parts6LCERN-OHL-S-2.00Microchip SAM
Thinkpad-Mod
Outdatedcandy92
17.1 × 21.4 mm40 parts4LCERN-OHL-W-2.00- schematic only · 414 partsRP2040/RP2350
Umiko
idorurez
414 partsNo license0 RP2040/RP2350
Gemini panel
0xCB-dev
112 × 70.6 mm50 parts4LCustom license11RP2040/RP2350
Pcb rails
0xCB-dev
305.1 × 111.5 mm228 parts2LCustom license5ESP32
OpenRX-Gemini
yasir-shahzad
17 × 15.7 mm85 parts6LCERN-OHL-S-2.00ESP32
OpenRX-Gemini sameside
yasir-shahzad
17 × 17.6 mm85 parts6LCERN-OHL-S-2.00ESP32
OpenRX-Mono
yasir-shahzad
10 × 16.3 mm61 parts6LCERN-OHL-S-2.00ESP32
OpenRX-Lite
yasir-shahzad
10 × 10.5 mm47 parts6LCERN-OHL-S-2.00ESP32
OpenRX-Gemini
tetraethylmethane
17 × 15.7 mm85 parts6LNo license1ESP32
OpenRX-Lite-UFL
yasir-shahzad
10 × 10.5 mm47 parts6LCERN-OHL-S-2.00ESP32
OpenRX-Mono
tetraethylmethane
10 × 17.3 mm61 parts6LNo license1ESP32
OpenRX-Lite-UFL
tetraethylmethane
10 × 11.5 mm47 parts6LNo license1
How designs wire the TLV75533PDQNR
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the TLV75533PDQNR connects to, and the resistors, capacitors and other passives placed on it.
- The OUT_1 pin is tied to 3.3V on 11 of 11 designs.
- The IN_4 pin is tied to 5V on 11 of 11 designs.
- The EN_3 pin is tied to 5V on 10 of 11 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUT_1pin 1 | Connected to: 3.3V 100% | — |
| GND_2pin 2 | Connected to: GND 100% | — |
| EN_3pin 3 | Connected to: 5V 91% | — |
| IN_4pin 4 | Connected to: 5V 100% | — |
| EP_5pin 5 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Gemini by 0xCB-dev, 1026-RPi-Power-Hat by wilsondr9999, Pcb by 0xCB-dev and OpenRX-Gemini by OpenDrone-hw.
The TLV75533PDQNR in open source designs
The gallery holds 22 open source boards using the TLV75533PDQNR from 12 GitHub repositories; a typical one measures about 17 × 16.3 mm and carries around 61 components.
90% use four copper layers or more, and 59% carry an open source license.
The most starred is Gemini by 0xCB-dev.
Parts used alongside the TLV75533PDQNR
Microcontrollers on boards using the TLV75533PDQNR
What boards using the TLV75533PDQNR are built for
TLV75533PDQNR: common questions
Where can I find a TLV75533PDQNR reference design?
Each of the 22 boards on this page is a real design using the TLV75533PDQNR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TLV75533PDQNR OUT_1 pin connected?
The OUT_1 pin is tied to 3.3V on 11 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the TLV75533PDQNR.
How is the TLV75533PDQNR IN_4 pin connected?
The IN_4 pin is tied to 5V on 11 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the TLV75533PDQNR.
How is the TLV75533PDQNR EN_3 pin connected?
The EN_3 pin is tied to 5V on 10 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the TLV75533PDQNR.
What parts are used alongside the TLV75533PDQNR?
The ESP32-C3FH4, SX1281IMLTRT, LR1121IMLTRT, RFX2401C and SKY13373-460LF appear in the most repositories here.
Which microcontrollers do boards using the TLV75533PDQNR use?
Most are built on ESP32 (15), RP2040/RP2350 (5) and Microchip SAM (1).
How big is a typical board using the TLV75533PDQNR?
The median is 17 × 16.3 mm, and 10% are two-layer designs.
What is the most popular open source board using the TLV75533PDQNR?
By GitHub stars, Gemini by 0xCB-dev, with 11 stars.
Can I simulate one of these boards using the TLV75533PDQNR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.