5 open source boards using the TMAG5273A1QDBVR

Real designs built with the TMAG5273A1QDBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the TMAG5273A1QDBVR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TMAG5273A1QDBVR connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
  • The SCL pin has a pull-up to 3.3V on 4 of 5 designs, most often 2 kΩ (then 3.3 kΩ).
  • The SDA pin has a pull-up to 3.3V on 4 of 5 designs, most often 2 kΩ (then 3.3 kΩ).
  • The TEST pin is tied to GND on 4 of 5 designs.
SCLpin 1Connected to: The microcontroller 80%
  • Pull-up to 3.3V on 80% · 2 kΩ (1), 3.3 kΩ (1), 5 kΩ (1)
TESTpin 2Connected to: GND 80% · not connected 20%
GNDpin 3Connected to: GND 100%
VCCpin 4Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (5), 1 µF (4), 10 µF (1)
INT_Npin 5Connected to: Not connected 60% · GND 20% · a signal 20%
SDApin 6Connected to: The microcontroller 80%
  • Pull-up to 3.3V on 80% · 2 kΩ (1), 3.3 kΩ (1), 5 kΩ (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Windnerd-Core by windnerd-labs, Pennyesc by qwertpas, CosmicMouse by tylerebowers and Thinkpad-Mod by Outdatedcandy92.

The TMAG5273A1QDBVR in open source designs

The gallery holds 5 open source boards using the TMAG5273A1QDBVR from 5 GitHub repositories; a typical one measures about 17.1 × 21.4 mm and carries around 25 components.

60% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.

The most starred is Windnerd-Core by windnerd-labs.

Microcontrollers on boards using the TMAG5273A1QDBVR

TMAG5273A1QDBVR: common questions

Where can I find a TMAG5273A1QDBVR reference design?

Each of the 5 boards on this page is a real design using the TMAG5273A1QDBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TMAG5273A1QDBVR VCC pin?

The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the TMAG5273A1QDBVR.

What pull-up resistor is used on the TMAG5273A1QDBVR SCL pin?

The SCL pin has a pull-up to 3.3V on 4 of 5 designs, most often 2 kΩ (then 3.3 kΩ). Counted from the KiCad layouts of 5 open source designs using the TMAG5273A1QDBVR.

What pull-up resistor is used on the TMAG5273A1QDBVR SDA pin?

The SDA pin has a pull-up to 3.3V on 4 of 5 designs, most often 2 kΩ (then 3.3 kΩ). Counted from the KiCad layouts of 5 open source designs using the TMAG5273A1QDBVR.

Which microcontrollers do boards using the TMAG5273A1QDBVR use?

Most are built on STM32 (2), RP2040/RP2350 (1) and Microchip SAM (1).

How big is a typical board using the TMAG5273A1QDBVR?

The median is 17.1 × 21.4 mm, and 60% are two-layer designs.

What is the most popular open source board using the TMAG5273A1QDBVR?

By GitHub stars, Windnerd-Core by windnerd-labs, with 9 stars.

Can I simulate one of these boards using the TMAG5273A1QDBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part