OpenChess - Controller Board
PaoloJN·openchess·hardware/hardware-controller/openchess-controller.kicad_pcb
About the OpenChess - Controller Board
OpenChess - Controller Board is an open source ESP32 PCB design by PaoloJN, published on GitHub. It is a 2-layer board measuring 58 × 71 mm, with 25 components from 17 distinct parts.
Its main chip is the ESP32-DevKitC, from the ESP32 family. Other key parts include the 74AHCT125 and TBD62783A. By type, the board carries 13 resistors, 5 capacitors, 3 ICs, 2 connectors, 1 module and 1 diode.
It belongs with the displays & leds and sensors designs in this gallery.
From the project
Physical chess board (ESP32 + 64 hall sensors + 81 WS2812 LEDs) playing online via Lichess
The old top-level hardware projects were archived to ../delete/old-hardware-2026-06-04/.
Start with DESIGNNOTES.md, then use each board's scripts/README.md` for generation steps.
Main components on the OpenChess - Controller Board
OpenChess - Controller Board bill of materials (BOM)
25 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-DevKitC | ESP32-DevKitC | U2 |
| 1 | 74AHCT125 | SOIC-14_3.9x8.7mm_P1.27mm | U3 |
| 1 | TBD62783A | DIP-18_W7.62mm | U6 |
| 1 | Lipo Rider Plus | PinSocket_1x08_P2.54mm_Vertical | M1 |
| 1 | Conn_02x13 | PinHeader_2x13_P2.54mm_Vertical | J1 |
| 1 | J_PANEL XH-10 | PinHeader_1x10_P2.54mm_Vertical | J3 |
| 1 | SS14 (or BAT60A) | D_SMA | D2 |
| 1 | 100UF 10µF | C_0805_2012Metric | C1 |
| 1 | 10µF | C_0805_2012Metric | C2 |
| 1 | 100nF | C_0805_2012Metric | C5 |
| 2 | 100nF | C_0603_1608Metric | C11, C12 |
| 6 | 10k | R_0805_2012Metric | R1, R2, R3, R4, R7, R8 |
| 2 | 15K 10k | R_0805_2012Metric | R5, R6 |
| 1 | 33Ω | R_0603_1608Metric | R11 |
| 1 | 220k | R_0603_1608Metric | R14 |
| 1 | 100k | R_0603_1608Metric | R15 |
| 2 | 10k | R_0603_1608Metric | R36, R37 |
OpenChess - Controller Board design files
The KiCad project lives in the PaoloJN/openchess repository on GitHub; these links point at the commit this page was built from.
OpenChess - Controller Board: common questions
What microcontroller does the OpenChess - Controller Board use?
The OpenChess - Controller Board is built around the ESP32-DevKitC, from the ESP32 family.
How big is the OpenChess - Controller Board?
The OpenChess - Controller Board measures 58 × 71 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the OpenChess - Controller Board?
25 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the OpenChess - Controller Board design files?
From the PaoloJN/openchess repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the OpenChess - Controller Board design in my own project?
The repository has no license, so all rights stay with PaoloJN. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the OpenChess - Controller Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in openchess
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k