BP
papaya·MB_ModulBox_NG·custom-frontends/8x-buttons/hardware/BP.kicad_pcb
About the BP PCB
BP is an open source PCB design by papaya, published on GitHub. It is a 2-layer board measuring 100 × 50 mm, with 18 components from 3 distinct parts.
By type, the board carries 8 switches, 8 diodes and 2 connectors.
From the project
Module boutons poussoirs (8 canaux) pour l'envoi d'événements MIDI numériques (Note On/Off, CC, etc.). La carte se branche sur le bus DIN (entrées digitales) du contrôleur MIDIbox NG et fournit en plus 8 sorties DOUT pour piloter des LEDs.
Module boutons poussoirs (8 canaux) pour l'envoi d'événements MIDI numériques (Note On/Off, CC, etc.). La carte se branche sur le bus DIN (entrées digitales) du contrôleur MIDIbox NG et fournit en plus 8 sorties DOUT pour piloter des LEDs.
- 8 boutons poussoirs mécaniques à LED incorporée (empreinte switchledmec) - 8 LED supplémentaires (empreinte LED Switch mec), câblées en sortie - 2 connecteurs IDC 2x05 P2.54mm : J1 = 8 entrées DIN, J2 = 8 sorties DOUT - Aucune résistance de pull-up sur la carte : le pull-up 10 kΩ est porté par le module DIN (74HC165), conformément à la référence MIDIbox…

BP bill of materials (BOM)
18 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | IDC-Header_2x05_P2.54mm_Vertical | IDC-Header_2x05_P2.54mm_Vertical | J1, J2 |
| 8 | PEC16-4XXXF-SXXXX switch led | switch_led_mec | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 8 | WS2812-2020 LED | LED Switch mec | D1, D2, D3, D4, D5, D6, D7, D8 |
BP design files
The KiCad project lives in the papaya/MB_ModulBox_NG repository on GitHub; these links point at the commit this page was built from.
BP: common questions
How big is the BP PCB?
The BP measures 100 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BP?
18 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BP design files?
From the papaya/MB_ModulBox_NG repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the BP design in my own project?
The repository has no license, so all rights stay with papaya. Use it as a reference, and ask the author before reusing the design.
More boards in MB_ModulBox_NG
PEC 16 V0.2
papaya
100 × 50 mm293 parts2LNo license0DIN4 R5 KS
papaya
100 × 50 mm58 parts2LNo license0Midi V0.1
papaya
50 × 100 mm42 parts2LNo license0STM32
Core32F4
papaya
118 × 87 mm34 parts2LNo license0Carte puissance
papaya
100 × 81.5 mm31 parts2LNo license0MB-KeySW 4x2 V0.3
papaya
100 × 50 mm28 parts2LNo license0Pad
papaya
100 × 50 mm21 parts2LNo license0DOUT
papaya
100 × 50 mm18 parts2LNo license0Pot 4 x 2
papaya
100.1 × 100 mm9 parts2LNo license0Pot
papaya
50 × 100 mm9 parts2LNo license0Fad 1
papaya
100 × 100 mm6 parts2LNo license0