Core32F4
papaya·MB_ModulBox_NG·standard-modules/Core/hardware/Core32F4.kicad_pcb
About the Core32F4 PCB
Core32F4 is an open source STM32 PCB design by papaya, published on GitHub. It is a 2-layer board measuring 118 × 87 mm, with 34 components from 17 distinct parts.
Its main chip is the STM32F4_Discovery_Header, from the STM32 family. Other key parts include the 74HC595 and 74HCT541. By type, the board carries 19 connectors, 8 resistors, 3 ICs, 2 capacitors, 1 transformer and 1 diode.
It belongs with the displays & leds designs in this gallery.
From the project
📖 Article de référence : ModulBox V2 sur le blog Ksir DIY'S.
📖 Article de référence : ModulBox V2 sur le blog Ksir DIY'S.
Ce module est une ré-implémentation sous KiCad basée sur les schémas originaux de la plateforme MIDIbox (MBHP) conçue par Thorsten Klose / ucapps.de.
Référence matérielle : MBHPCORESTM32F4 et manuel matériel MIDIbox NG. Crédits : Thorsten Klose et ucapps.de. Ré-implémentation KiCad destinée à l'étude et au DIY non commercial. Le dépôt ne publie pas encore de fichier de licence ; vérifier les conditions applicables à l'original avant redistribution.

Main components on the Core32F4
Core32F4 bill of materials (BOM)
34 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HC595 | DIP-16_W7.62mm_LongPads | IC2 |
| 1 | STM32F4_Discovery_Header | stm32f4_discovery_header_ksir | IC4 |
| 1 | 74HCT541 | DIP-20_W7.62mm_LongPads | ic1 |
| 1 | SD_Card | SDRSMT2MQ | J1 |
| 2 | CONN_2 | PinHeader_1x02_P2.54mm_Vertical | J2, J18 |
| 10 | CONN_02X05 | IDC-Header_2x05_P2.54mm_Vertical | J4A1, J4B1, J5A1, J5B1, J8J9, J10A1, J10B1, J11E1 +2 |
| 2 | CONN_02X08 | IDC-Header_2x08_P2.54mm_Vertical | J15A1, J15B1 |
| 1 | CONN_01X03 | PinHeader_1x03_P2.54mm_Vertical | J15S1 |
| 1 | CONN_01X02 | PinHeader_1x02_P2.54mm_Vertical | J17 |
| 2 | 10k | Potentiometer_VishaySpectrol-Econtrim-Type36T | P1, P2 |
| 1 | BC817-40 | bc337 | T1 |
| 1 | WS2812-2020 D | Diode_DO-35_SOD27_Horizontal_RM10 | D1 |
| 2 | 100NF 100nf | C_Disc_D3.8mm_W2.6mm_P2.50mm | C14, C15 |
| 4 | 2.2k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R7a1, R7b1, R8a1, R8b1 |
| 2 | 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R11, R13 |
| 1 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R12 |
| 1 | 4x1K | R_Array_SIP5 | R33 |
Core32F4 design files
The KiCad project lives in the papaya/MB_ModulBox_NG repository on GitHub; these links point at the commit this page was built from.
Core32F4: common questions
What microcontroller does the Core32F4 use?
The Core32F4 is built around the STM32F4_Discovery_Header, from the STM32 family.
How big is the Core32F4 PCB?
The Core32F4 measures 118 × 87 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Core32F4?
34 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Core32F4 design files?
From the papaya/MB_ModulBox_NG repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Core32F4 design in my own project?
The repository has no license, so all rights stay with papaya. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Core32F4 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in MB_ModulBox_NG
PEC 16 V0.2
papaya
100 × 50 mm293 parts2LNo license0DIN4 R5 KS
papaya
100 × 50 mm58 parts2LNo license0Midi V0.1
papaya
50 × 100 mm42 parts2LNo license0Carte puissance
papaya
100 × 81.5 mm31 parts2LNo license0MB-KeySW 4x2 V0.3
papaya
100 × 50 mm28 parts2LNo license0Pad
papaya
100 × 50 mm21 parts2LNo license0DOUT
papaya
100 × 50 mm18 parts2LNo license0BP
papaya
100 × 50 mm18 parts2LNo license0Pot 4 x 2
papaya
100.1 × 100 mm9 parts2LNo license0Pot
papaya
50 × 100 mm9 parts2LNo license0Fad 1
papaya
100 × 100 mm6 parts2LNo license0
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k