Pad
papaya·MB_ModulBox_NG·custom-frontends/pad-rgb/hardware/Pad.kicad_pcb
About the Pad PCB
Pad is an open source PCB design by papaya, published on GitHub. It is a 2-layer board measuring 100 × 50 mm, with 21 components from 5 distinct parts.
By type, the board carries 8 diodes, 8 capacitors, 3 connectors and 2 switches.
From the project
📖 Article de référence : 4X2-PADS-RGB sur le blog Ksir DIY'S — modèle PAD4X2.
📖 Article de référence : 4X2-PADS-RGB sur le blog Ksir DIY'S — modèle PAD4X2.
Ce module est une conception originale MB MODULBOX NG (conception Ksir), compatible avec les bus et modules du système MIDIbox NG. Ce n'est pas un module officiel MIDIbox.
Carte d'interface originale MB MODULBOX NG (conception Ksir), compatible avec les bus et modules du système MIDIbox NG. Ce n'est pas un module officiel MIDIbox.

Pad bill of materials (BOM)
21 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | IDC-Header_2x05_P2.54mm_Vertical | IDC-Header_2x05_P2.54mm_Vertical | J1, J2, J3 |
| 2 | Pad_x_4 | Pad x 4 | Sw1, Sw2 |
| 8 | WS2812-2020 | LED_WS2812B-2020_PLCC4_2.0x2.0mm | D501, D502, D503, D504, D505, D506, D507, D508 |
| 1 | 100nf | C_0402_1005Metric | C501 |
| 7 | 100nf | CAPC1005X55N | C502, C503, C504, C505, C506, C507, C508 |
Pad design files
The KiCad project lives in the papaya/MB_ModulBox_NG repository on GitHub; these links point at the commit this page was built from.
Pad: common questions
How big is the Pad PCB?
The Pad measures 100 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pad?
21 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pad design files?
From the papaya/MB_ModulBox_NG repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pad design in my own project?
The repository has no license, so all rights stay with papaya. Use it as a reference, and ask the author before reusing the design.
More boards in MB_ModulBox_NG
PEC 16 V0.2
papaya
100 × 50 mm293 parts2LNo license0DIN4 R5 KS
papaya
100 × 50 mm58 parts2LNo license0Midi V0.1
papaya
50 × 100 mm42 parts2LNo license0STM32
Core32F4
papaya
118 × 87 mm34 parts2LNo license0Carte puissance
papaya
100 × 81.5 mm31 parts2LNo license0MB-KeySW 4x2 V0.3
papaya
100 × 50 mm28 parts2LNo license0DOUT
papaya
100 × 50 mm18 parts2LNo license0BP
papaya
100 × 50 mm18 parts2LNo license0Pot 4 x 2
papaya
100.1 × 100 mm9 parts2LNo license0Pot
papaya
50 × 100 mm9 parts2LNo license0Fad 1
papaya
100 × 100 mm6 parts2LNo license0