Pot 4 x 2

papaya·MB_ModulBox_NG·custom-frontends/8x-pots/hardware/Pot-X2.kicad_pcb

Pot 4 x 2 PCB layout, top view — open source board by papaya

About the Pot 4 x 2 PCB

Pot 4 x 2 is an open source PCB design by papaya, published on GitHub. It is a 2-layer board measuring 100.1 × 100 mm, with 9 components from 2 distinct parts.

It belongs with the audio designs in this gallery.

From the project

Module potentiomètres rotatifs (8 canaux) pour le contrôle de paramètres continus MIDI (volume, filtre, effets, etc.). Chaque potentiomètre est lu sur une voie analogique indépendante. La carte ne contient aucun convertisseur analogique-numérique : elle expose 8 curseurs sur un c

Module potentiomètres rotatifs (8 canaux) pour le contrôle de paramètres continus MIDI (volume, filtre, effets, etc.). Chaque potentiomètre est lu sur une voie analogique indépendante. La carte ne contient aucun convertisseur analogique-numérique : elle expose 8 curseurs sur un connecteur IDC, reliés au module AINSER64 (MCP3208 + CD4051) du bus AIN.

- 8 potentiomètres rotatifs (10 kΩ), empreinte RK09L and RK09D - Tension de référence : +3V0 (et non +5V) — la borne +3V0 alimente les deux extrémités de chaque potentiomètre - Sortie : 8 curseurs + GND + +3V0 sur un connecteur IDC 2x05 P2.54mm…

Pot 4 x 2, from the project README
From the project README

Pot 4 x 2 bill of materials (BOM)

9 components, 2 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
IDC-Header_2x05_P2.54mm_Vertical
J1
8
POTA
pot1, pot2, pot3, pot4, pot5, pot6, pot7, pot8

Pot 4 x 2 design files

The KiCad project lives in the papaya/MB_ModulBox_NG repository on GitHub; these links point at the commit this page was built from.

Pot 4 x 2: common questions

How big is the Pot 4 x 2 PCB?

The Pot 4 x 2 measures 100.1 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pot 4 x 2?

9 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Pot 4 x 2 design files?

From the papaya/MB_ModulBox_NG repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Pot 4 x 2 design in my own project?

The repository has no license, so all rights stay with papaya. Use it as a reference, and ask the author before reusing the design.

More boards in MB_ModulBox_NG

Similar boards