Fad 1
papaya·MB_ModulBox_NG·custom-frontends/4x-faders/hardware/Fad_1.kicad_pcb
About the Fad 1 PCB
Fad 1 is an open source PCB design by papaya, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 6 components from 3 distinct parts.
From the project
Carte de front-end intégrant des faders (glissières) pour le contrôle continu de paramètres MIDI (volume, filtre, effets, etc.). Chaque fader est lu sur une voie analogique indépendante. La carte ne contient aucun convertisseur analogique-numérique : elle expose les curseurs sur
Carte de front-end intégrant des faders (glissières) pour le contrôle continu de paramètres MIDI (volume, filtre, effets, etc.). Chaque fader est lu sur une voie analogique indépendante. La carte ne contient aucun convertisseur analogique-numérique : elle expose les curseurs sur un connecteur IDC, reliés au module AINSER64 (MCP3208 + CD4051) du bus AIN. Le répertoire contient deux cartes complémentaires : - Fad1 : 4 faders, connecteurs J3 (curseurs) et J4 (passage) - Fad2 : 4 faders, connecteur J5 (curseurs)

Fad 1 bill of materials (BOM)
6 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IDC-Header_2x05_P2.54mm_Vertical | IDC-Header_2x05_P2.54mm_Vertical | J3 |
| 1 | CONN_01X06_SOCKET IDC-Header_2x05_P2.54mm_Vertical | IDC-Header_2x05_P2.54mm_Vertical | J4 |
| 4 | fad | fader | fad5, fad6, fad7, fad8 |
Fad 1 design files
The KiCad project lives in the papaya/MB_ModulBox_NG repository on GitHub; these links point at the commit this page was built from.
Fad 1: common questions
How big is the Fad 1 PCB?
The Fad 1 measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Fad 1?
6 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Fad 1 design files?
From the papaya/MB_ModulBox_NG repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Fad 1 design in my own project?
The repository has no license, so all rights stay with papaya. Use it as a reference, and ask the author before reusing the design.
More boards in MB_ModulBox_NG
PEC 16 V0.2
papaya
100 × 50 mm293 parts2LNo license0DIN4 R5 KS
papaya
100 × 50 mm58 parts2LNo license0Midi V0.1
papaya
50 × 100 mm42 parts2LNo license0STM32
Core32F4
papaya
118 × 87 mm34 parts2LNo license0Carte puissance
papaya
100 × 81.5 mm31 parts2LNo license0MB-KeySW 4x2 V0.3
papaya
100 × 50 mm28 parts2LNo license0Pad
papaya
100 × 50 mm21 parts2LNo license0DOUT
papaya
100 × 50 mm18 parts2LNo license0BP
papaya
100 × 50 mm18 parts2LNo license0Pot
papaya
50 × 100 mm9 parts2LNo license0Pot 4 x 2
papaya
100.1 × 100 mm9 parts2LNo license0