PEC 16 V0.2
papaya·MB_ModulBox_NG·custom-frontends/encoders-led-rgb/hardware/PEC_16_V0.2.kicad_pcb
About the PEC 16 V0.2 PCB
PEC 16 V0.2 is an open source PCB design by papaya, published on GitHub. It is a 2-layer board measuring 100 × 50 mm, with 293 components from 10 distinct parts.
By type, the board carries 128 diodes, 128 capacitors, 21 connectors and 8 switches.
From the project
Les PCB de la Control Board, de l'Encoders Board et du LED Ring existent déjà dans trois sous-dossiers. En revanche, les sous-projets ne sont pas encore autonomes : aucun ne dispose d'un schéma indépendant vérifié, les exports de fabrication ne sont pas séparés par PCB, et des co
Les PCB de la Control Board, de l'Encoders Board et du LED Ring existent déjà dans trois sous-dossiers. En revanche, les sous-projets ne sont pas encore autonomes : aucun ne dispose d'un schéma indépendant vérifié, les exports de fabrication ne sont pas séparés par PCB, et des configurations KiCad orphelines subsistent. Le schéma hardware/PEC16V0.2.kicadsch` reste la référence historique de l'ensemble ; il n'a pas été dupliqué artificiellement en trois schémas qui ne correspondraient pas aux cartes.

PEC 16 V0.2 bill of materials (BOM)
293 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | CONN_01X06_SOCKET Conn_01x06_Socket | PinSocket_1x03_P2.54mm_Vertical | J4, J5, J24, J25 |
| 3 | sin_in | IDC-Header_2x05_P2.54mm_Vertical_ksr_dIN | J11, J12, J13 |
| 4 | CONN_01X06_PIN Conn_01x06_Pin | PinHeader_1x03_P2.54mm_Vertical | J14, J15, J34, J35 |
| 4 | CONN_01X06_SOCKET Conn_01x06_Socket | PinSocket_1x06_P2.54mm_Vertical | J20, J21, J22, J23 |
| 4 | CONN_01X06_PIN Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J30, J31, J32, J33 |
| 2 | IDC-HEADER_2X05_P2.54MM_VERTICAL IDC-Header_2x05_P2.54mm_Vertical | IDC-Header_2x05_P2.54mm_Vertical | J44, J45 |
| 8 | MountingHole | Hole_9.5mm | H5, H6, H7, H8, H9, H10, H11, H12 |
| 8 | PEC16-4XXXF-SXXXX | PEC164120FS0012 | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 128 | WS2812-2020 | LED_WS2812B-2020_PLCC4_2.0x2.0mm | D1, D2, D3, D4, D5, D6, D7, D8 +120 |
| 128 | 100NF 100nf | CAPC1005X55N | C1, C2, C3, C4, C5, C6, C7, C8 +120 |
PEC 16 V0.2 design files
The KiCad project lives in the papaya/MB_ModulBox_NG repository on GitHub; these links point at the commit this page was built from.
PEC 16 V0.2: common questions
How big is the PEC 16 V0.2 PCB?
The PEC 16 V0.2 measures 100 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PEC 16 V0.2?
293 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PEC 16 V0.2 design files?
From the papaya/MB_ModulBox_NG repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PEC 16 V0.2 design in my own project?
The repository has no license, so all rights stay with papaya. Use it as a reference, and ask the author before reusing the design.
More boards in MB_ModulBox_NG
DIN4 R5 KS
papaya
100 × 50 mm58 parts2LNo license0Midi V0.1
papaya
50 × 100 mm42 parts2LNo license0STM32
Core32F4
papaya
118 × 87 mm34 parts2LNo license0Carte puissance
papaya
100 × 81.5 mm31 parts2LNo license0MB-KeySW 4x2 V0.3
papaya
100 × 50 mm28 parts2LNo license0Pad
papaya
100 × 50 mm21 parts2LNo license0DOUT
papaya
100 × 50 mm18 parts2LNo license0BP
papaya
100 × 50 mm18 parts2LNo license0Pot 4 x 2
papaya
100.1 × 100 mm9 parts2LNo license0Pot
papaya
50 × 100 mm9 parts2LNo license0Fad 1
papaya
100 × 100 mm6 parts2LNo license0