MB-KeySW 4x2 V0.3
papaya·MB_ModulBox_NG·custom-frontends/keysw-4x2/hardware/MB-KeySW_4x2_V0.3.kicad_pcb
About the MB-KeySW 4x2 V0.3 PCB
MB-KeySW 4x2 V0.3 is an open source PCB design by papaya, published on GitHub. It is a 2-layer board measuring 100 × 50 mm, with 28 components from 8 distinct parts.
By type, the board carries 8 switches, 8 diodes, 8 capacitors and 4 connectors.
It belongs with the displays & leds designs in this gallery.
From the project
Ce module est une conception originale MB MODULBOX NG (conception Ksir), compatible avec les bus et modules du système MIDIbox NG. Ce n'est pas un module officiel MIDIbox.
Ce module est une conception originale MB MODULBOX NG (conception Ksir), compatible avec les bus et modules du système MIDIbox NG. Ce n'est pas un module officiel MIDIbox.
- Le Core STM32F4 dispose de 4 lignes WS2812 (J4A PB10 / PB11, J4B PB6 = TIM4, reference MIOS32 / J4B PB9), chacune avec un pull-up 2,2 kΩ et une sortie en open-drain. - L'alimentation +5V des LED doit etre fournie separement (les LED ne doivent pas etre alimentees via J4A/J4B du Core : jusqu'a 20 mA par LED RGB). Voir specifications WS2812 MIOS32. - Comme les LED sont cascadees, chaque LED decode et affiche sa propre…

MB-KeySW 4x2 V0.3 bill of materials (BOM)
28 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | IDC-Header_2x05_P2.54mm_Vertical | IDC-Header_2x05_P2.54mm_Vertical | J1, J2, J3 |
| 1 | CONN_01X06_SOCKET Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | CHERRY MX1B-52NA | SW_Alps_Matias_1.00u_cherry_LP | SW0 |
| 7 | PEC16-4XXXF-SXXXX CHERRY MX1B-52NA | SW_Alps_Matias_1.00u_cherry_LP | SW1, SW2, SW3, SW4, SW5, SW6, SW7 |
| 1 | SK6812MINI-E | SK6812-MINI-E | D0 |
| 7 | WS2812-2020 SK6812MINI-E | SK6812-MINI-E | D1, D2, D3, D4, D5, D6, D7 |
| 1 | 100nf | C_1206_3216Metric | C0 |
| 7 | 100NF 100nf | C_1206_3216Metric | C1, C2, C3, C4, C5, C6, C7 |
MB-KeySW 4x2 V0.3 design files
The KiCad project lives in the papaya/MB_ModulBox_NG repository on GitHub; these links point at the commit this page was built from.
MB-KeySW 4x2 V0.3: common questions
How big is the MB-KeySW 4x2 V0.3 PCB?
The MB-KeySW 4x2 V0.3 measures 100 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MB-KeySW 4x2 V0.3?
28 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MB-KeySW 4x2 V0.3 design files?
From the papaya/MB_ModulBox_NG repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MB-KeySW 4x2 V0.3 design in my own project?
The repository has no license, so all rights stay with papaya. Use it as a reference, and ask the author before reusing the design.
More boards in MB_ModulBox_NG
PEC 16 V0.2
papaya
100 × 50 mm293 parts2LNo license0DIN4 R5 KS
papaya
100 × 50 mm58 parts2LNo license0Midi V0.1
papaya
50 × 100 mm42 parts2LNo license0STM32
Core32F4
papaya
118 × 87 mm34 parts2LNo license0Carte puissance
papaya
100 × 81.5 mm31 parts2LNo license0Pad
papaya
100 × 50 mm21 parts2LNo license0DOUT
papaya
100 × 50 mm18 parts2LNo license0BP
papaya
100 × 50 mm18 parts2LNo license0Pot 4 x 2
papaya
100.1 × 100 mm9 parts2LNo license0Pot
papaya
50 × 100 mm9 parts2LNo license0Fad 1
papaya
100 × 100 mm6 parts2LNo license0
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k