DOUT

papaya·MB_ModulBox_NG·standard-modules/DOUT/hardware/DOUT.kicad_pcb

DOUT PCB layout, top view — open source board by papaya

About the DOUT PCB

DOUT is an open source PCB design by papaya, published on GitHub. It is a 2-layer board measuring 100 × 50 mm, with 18 components from 7 distinct parts.

Other key parts include the SN74HC595N. By type, the board carries 6 connectors, 4 ICs, 4 capacitors and 4 resistors.

From the project

Module de base DOUT (Digital Output) de l'écosystème MIDIbox NG, équivalent du MBHPDOUTX4R5. Il fournit 32 sorties digitales (4 registres à décalage 74HC595 en cascade) pour piloter des LEDs standards, des afficheurs 7 segments, des relais ou de la logique.

Module de base DOUT (Digital Output) de l'écosystème MIDIbox NG, équivalent du MBHPDOUTX4R5. Il fournit 32 sorties digitales (4 registres à décalage 74HC595 en cascade) pour piloter des LEDs standards, des afficheurs 7 segments, des relais ou de la logique.

Ce module est une ré-implémentation KiCad basée sur les schémas originaux de la plateforme MIDIbox (MBHP) — layout DOUTX4R5 (revised PCB, SmashTV) — conçue par Thorsten Klose / ucapps.de**.

DOUT, from the project README
From the project README

Main components on the DOUT

DOUT bill of materials (BOM)

18 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
4
SN74HC595N
IC1, IC2, IC3, IC4
2
sin_in
J1, J2
2
sin_in
J3, J6
2
CONN_01X06_SOCKET
sin_in
J4, J5
4
100NF
C1, C2, C3, C4
1
220 ohm
R1
3
220 ohm
R2, R3, R4

DOUT design files

The KiCad project lives in the papaya/MB_ModulBox_NG repository on GitHub; these links point at the commit this page was built from.

DOUT: common questions

How big is the DOUT PCB?

The DOUT measures 100 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DOUT?

18 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the DOUT design files?

From the papaya/MB_ModulBox_NG repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the DOUT design in my own project?

The repository has no license, so all rights stay with papaya. Use it as a reference, and ask the author before reusing the design.

More boards in MB_ModulBox_NG