ESP32-RTL8201F-devboard

PhilipHiet·ESP32-RTL8201F-devboard·pcb/ESP32-RTL8201F-devboard.kicad_pcb

ESP32-RTL8201F-devboard PCB layout, top view — open source ESP32 board by PhilipHiet

About the ESP32-RTL8201F-devboard PCB

ESP32-RTL8201F-devboard is an open source ESP32 PCB design by PhilipHiet, published on GitHub under the MIT license. It is a 4-layer board measuring 33 × 68.5 mm, with 49 components from 23 distinct parts.

Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the CH340C, AMS1117-3.3 and RTL8201F. By type, the board carries 24 resistors, 13 capacitors, 4 ICs, 3 diodes, 2 transistors and 2 connectors.

It belongs with the rf & radio, dev boards & breakouts and iot & wireless designs in this gallery.

From the project

Develpoment-board for the ESP32 with a RTL8201F ethernet transceiver and an onboard USB-C debug-interface

The schematics are based on the esp-32-poe-dev project by @jorticus but using the ESP32-WROOM-32E module instead of a barebone ESP32.

This board is designed as a 4-layer PCB and is optimized for cheap assembly with JLCPCB. So using basic parts where possible and a custom ESP32-WROOM-32E footrpint so the minimum via-hole-size is 0.3mm.

The boards were fully assembled by JLCPCB (except for the pinheaders). The necessary production files are included under pcb/jilcpcb.

ESP32-RTL8201F-devboard, from the project README
From the project README

Main components on the ESP32-RTL8201F-devboard

ESP32-RTL8201F-devboard bill of materials (BOM)

49 components, 23 distinct parts.

QtyPartRefs
1
CH340C
U1
1
AMS1117-3.3
U2
1
RTL8201F
U4
1
ESP32-WROOM-32
U6
2
SS8050
Q1, Q2
1
HR911105A
J1
1
USB_C_Receptacle_USB2.0_16P
J4
2
SS14
D1, D3
1
LED
D2
1
FB 600R@100MHz 1.3A
L3
2
22u
C1, C4
7
100n
C2, C7, C22, C23, C24, C25, C26
1
100n 100V
C3
1
10u
C5
2
1u
C10, C11
8
10k
R1, R5, R6, R7, R9, R10, R11, R12
2
49R9
R2, R13
2
100
R3, R4
2
4k99 1%
R8, R24
3
49.9R 1%
R14, R17, R18
Show 3 more
QtyPartRefs
2
270R
R15, R16
4
5k1
R19, R20, R21, R22
1
470
R23

ESP32-RTL8201F-devboard design files

The KiCad project lives in the PhilipHiet/ESP32-RTL8201F-devboard repository on GitHub; these links point at the commit this page was built from.

ESP32-RTL8201F-devboard: common questions

What microcontroller does the ESP32-RTL8201F-devboard use?

The ESP32-RTL8201F-devboard is built around the ESP32-WROOM-32, from the ESP32 family.

How big is the ESP32-RTL8201F-devboard PCB?

The ESP32-RTL8201F-devboard measures 33 × 68.5 mm, has 4 copper layers and is 1.5604 mm thick.

How many components are on the ESP32-RTL8201F-devboard?

49 components, from 23 distinct parts. The full bill of materials is listed on this page.

Where can I download the ESP32-RTL8201F-devboard design files?

From the PhilipHiet/ESP32-RTL8201F-devboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ESP32-RTL8201F-devboard design in my own project?

Yes, under the terms of its MIT license, which PhilipHiet chose for the repository.

Can I test firmware for the ESP32-RTL8201F-devboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards