3 open source boards using the TPS22914BYFPR

Real designs built with the TPS22914BYFPR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The TPS22914BYFPR in open source designs

The gallery holds 3 open source boards using the TPS22914BYFPR from 3 GitHub repositories; a typical one measures about 90 × 80 mm and carries around 356 components.

67% use four copper layers or more, and 100% carry an open source license.

The most starred is Glider by Modos-Labs.

Microcontrollers on boards using the TPS22914BYFPR

What boards using the TPS22914BYFPR are built for

TPS22914BYFPR: common questions

Where can I find a TPS22914BYFPR reference design?

Each of the 3 boards on this page is a real design using the TPS22914BYFPR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the TPS22914BYFPR?

The ADV7611, CBTL02043A, FUSB302BMPX, INA3221 and JW3651QFNE appear in the most repositories here.

Which microcontrollers do boards using the TPS22914BYFPR use?

Most are built on STM32 (2).

How big is a typical board using the TPS22914BYFPR?

The median is 90 × 80 mm, and 33% are two-layer designs.

What is the most popular open source board using the TPS22914BYFPR?

By GitHub stars, Glider by Modos-Labs, with 2,676 stars.

Can I simulate one of these boards using the TPS22914BYFPR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part