OpenFence
plyalex·OpenFence·hardware/pcbs/MainCollar/MainCollar.kicad_pcb
About the OpenFence PCB
OpenFence is an open source Microchip SAM PCB design by plyalex, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 57 × 97 mm, with 74 components from 39 distinct parts.
Its main chip is the SAMD21G, from the Microchip SAM family. Other key parts include the MPU9250, PA6C, S25FL116K, RF95W and MCP73871. By type, the board carries 30 capacitors, 17 resistors, 9 ICs, 9 connectors, 4 diodes and 2 inductors.
It belongs with the rf & radio designs in this gallery.
From the project
OpenFence is an open source GPS based digital livestock fencing system and web interface, aiming to reduce barriers of using cell grazing.
Main components on the OpenFence
OpenFence bill of materials (BOM)
74 components, 39 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MPU9250 | MPU9250 | U1 |
| 1 | SAMD21G | TQFP-48_7x7mm_Pitch0.5mm | U2 |
| 1 | PA6C | PA6C | U3 |
| 1 | S25FL116K | SOIC-8_3.9x4.9mm_Pitch1.27mm | U4 |
| 1 | RF95W | RFM9xW | U5 |
| 1 | MCP73871 | QFN-20-1EP_4x4mm_Pitch0.5mm | U6 |
| 1 | MAX5387 | TSSOP-14_4.4x5mm_Pitch0.65mm | U7 |
| 1 | MCP1700T-3302E/MB | SOT89-3_Housing_Handsoldering | U8 |
| 1 | PAM8403 | SOIC-16_3.9x9.9mm_Pitch1.27mm | U9 |
| 1 | 2N7002 | SOT-23_Handsoldering | Q1 |
| 1 | 32.768KHZ 32.768kHz | FC-135 | Y1 |
| 1 | SMA-EDGE | RF-SMA-EDGE | J1 |
| 1 | USB_OTG | USB-10118193-0001LF | P1 |
| 1 | CONN_01X05 | Pin_Header_Straight_1x05 | P2 |
| 1 | Solar1 | Pin_Header_Straight_1x02 | P3 |
| 1 | Solar2 | Pin_Header_Straight_1x02 | P4 |
| 1 | CONN_02X05 | HDR_2x5_Pitch1.27mm | P5 |
| 1 | Battery | Pin_Header_Straight_1x03 | P6 |
| 1 | SPK_L | Pin_Header_Straight_1x02 | P7 |
| 1 | SPK_R | Pin_Header_Straight_1x02 | P8 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SW_PUSH | SW_SPST_FSMSM | SW1 |
| 1 | USBLC6-2 | SOT666 | D1 |
| 3 | SS24 | SMA_Handsoldering | D2, D3, D4 |
| 2 | 600R @ 100MHz | IND-0805 | L1, L2 |
| 10 | 0.1UF 0.1uF | C_0603_HandSoldering | C1, C4, C6, C9, C10, C13, C14, C17 +2 |
| 2 | 18PF 18pF | C_0603_HandSoldering | C2, C3 |
| 2 | 0.01UF 0.01uF | C_0603_HandSoldering | C5, C11 |
| 5 | 4.7UF 4.7uF | C_0603_HandSoldering | C7, C16, C19, C20, C23 |
| 7 | 1UF 1uF | C_0603_HandSoldering | C8, C12, C22, C26, C27, C28, C29 |
| 1 | 2200UF 2200uF | Cap1017 | C15 |
| 2 | 0.47UF 0.47uF | C_0603_HandSoldering | C21, C24 |
| 1 | 47UF 47uF | C_1812_HandSoldering | C30 |
| 5 | 10K | R_0603_HandSoldering | R1, R3, R4, R5, R12 |
| 2 | 330 | R_0603_HandSoldering | R2, R20 |
| 1 | 1M | R_0603_HandSoldering | R6 |
| 4 | 1K | R_0603_HandSoldering | R7, R8, R9, R17 |
| 3 | 100K | R_0603_HandSoldering | R10, R15, R19 |
| 1 | 270K | R_0603_HandSoldering | R14 |
| 1 | 50K | R_0603_HandSoldering | R18 |
OpenFence design files
The KiCad project lives in the plyalex/OpenFence repository on GitHub; these links point at the commit this page was built from.
OpenFence: common questions
What microcontroller does the OpenFence use?
The OpenFence is built around the SAMD21G, from the Microchip SAM family.
How big is the OpenFence PCB?
The OpenFence measures 57 × 97 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the OpenFence?
74 components, from 39 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the OpenFence design files?
From the plyalex/OpenFence repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the OpenFence design in my own project?
Yes, under the terms of its GPL-3.0 license, which plyalex chose for the repository.
Can I test firmware for the OpenFence without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416