16 open source boards using the PAM8403

Real designs built with the PAM8403, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

16 boardsClear filters|Most starred

How designs wire the PAM8403

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the PAM8403 connects to, and the resistors, capacitors and other passives placed on it.

  • The T pin is tied to GND on 10 of 10 designs.
  • The L+ pin has a capacitor to GND on 8 of 10 designs, most often 1 µF (then 100 nF).
  • The VIN pin has a capacitor to GND on 7 of 10 designs, most often 1 µF (then 100 nF).
  • The PVDD1 pin has a capacitor to GND on 7 of 8 designs, most often 100 nF (then 1 µF).
Tpin 2Connected to: GND 100%
VINpin 4Connected to: REF5025 20%, WeAct_STM32G474CEU6_MiniCore 20%, a connector 20% · 5V 40%
  • Capacitor to GND on 70% · 1 µF (6), 100 nF (6), 47 µF (3)
GNDpin 5, 11Connected to: GND 56% · a signal 22%
  • Capacitor to GND on 40% · 100 nF (6), 1 µF (2), 100 µF (2)
R-pin 6Connected to: REF5025 20%, WeAct_STM32G474CEU6_MiniCore 20%, a connector 20% · 5V 40%
  • Capacitor to GND on 60% · 100 nF (6), 1 µF (5), 10 µF (2)
R+pin 7Connected to: Signal 90%
  • Series capacitor on 50% · 1 µF (2), 470 nF (1), 4.7 µF (1)
  • Series resistor on 40% · 10 kΩ (1)
L+pin 8Connected to: Signal 90%
  • Capacitor to GND on 80% · 1 µF (3), 100 nF (3), 470 nF (1)
L-pin 9Connected to: GND 60% · not connected 30%
INRpin 10Connected to: Signal 100%
  • Series resistor on 50% · 10 kΩ (2)
  • Series capacitor on 38% · 470 nF (1), 4.7 µF (1)
SHNDpin 12Connected to: REF5025 25%, WeAct_STM32G474CEU6_MiniCore 25%, a connector 25%
  • Capacitor to GND on 50% · 100 nF (6), 1 µF (2), 100 µF (2)
PVDD1pin 13Connected to: REF5025 25%, WeAct_STM32G474CEU6_MiniCore 25%, a connector 25% · 5V 25%
  • Capacitor to GND on 88% · 100 nF (6), 1 µF (5), 47 µF (3)
PGND1pin 15Connected to: GND 75% · not connected 25%

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenFence by plyalex, 10x10 by DAlexis, Ass shield by immortalserg and STM32G474-Precision-Lab-Power-Supply by Aleksei327.

The PAM8403 in open source designs

The gallery holds 16 open source boards using the PAM8403 from 11 GitHub repositories; a typical one measures about 93.8 × 96 mm and carries around 77 components.

94% are two-layer designs, the rest use four layers or more, and 56% carry an open source license.

The most starred is OpenFence by plyalex.

Microcontrollers on boards using the PAM8403

PAM8403: common questions

Where can I find a PAM8403 reference design?

Each of the 16 boards on this page is a real design using the PAM8403. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the PAM8403 T pin connected?

The T pin is tied to GND on 10 of 10 designs. Counted from the KiCad layouts of 11 open source designs using the PAM8403.

How is the PAM8403 L+ pin connected?

The L+ pin has a capacitor to GND on 8 of 10 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 11 open source designs using the PAM8403.

How is the PAM8403 VIN pin connected?

The VIN pin has a capacitor to GND on 7 of 10 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 11 open source designs using the PAM8403.

What parts are used alongside the PAM8403?

The DAC8830, INA228, MP9486A, OPA454 and PC817 appear in the most repositories here.

Which microcontrollers do boards using the PAM8403 use?

Most are built on ESP32 (3), STM32 (3), PIC (1) and RP2040/RP2350 (1).

How big is a typical board using the PAM8403?

The median is 93.8 × 96 mm, and 94% are two-layer designs.

What is the most popular open source board using the PAM8403?

By GitHub stars, OpenFence by plyalex, with 28 stars.

Can I simulate one of these boards using the PAM8403 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part