13 open source boards using the MPU9250
Real designs built with the MPU9250, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
RCCAR IF Board GPS
vedderb
81 × 55 mm170 parts4LGPL-3.0145Microchip SAM
OpenFence
plyalex
57 × 97 mm74 parts2LGPL-3.028STM32
QUarkNano 9250 UC4H
ukmook
21.5 × 30 mm61 parts4LCC-BY-SA-4.010STM32
VESC-6
veazhang
62 × 60 mm143 parts4LNo license4STM32
ProgArm-Hardware
ProgArm
40 × 50 mm130 parts2LGPL-3.03STM32
Roboy crazyfly
Roboy
80.2 × 80.2 mm108 parts4LBSD-3-Clause2STM32
SPACE-DRIVE
msglazer
62 × 60 mm143 parts4LNo license1BenTo-Legacy
benkuper
142 × 23 mm76 parts2LGPL-3.01ESP8266
Avalon communication board
AvalonROV
100 × 62.1 mm115 parts2LNo license0STM32
QUarkNano 9250
ukmook
21.5 × 30 mm60 parts4LCC-BY-SA-4.010STM32
Tinyfc core
wangyeee
36 × 44 mm103 parts4LBSD-3-Clause9STM32
Uwb
vedderb
56 × 34.5 mm53 parts2LGPL-3.0145AVR/Arduino
Tomo
kwan3217
35.6 × 55.9 mm57 parts2LGPL-2.02
How designs wire the MPU9250
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the MPU9250 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 has a decoupling capacitor on 10 of 11 designs, most often 100 nF (then 2.2 µF).
- Pin 8 has a decoupling capacitor on 10 of 11 designs, most often 100 nF (then 10 nF).
- Pin 10 has a capacitor to GND on 10 of 11 designs, most often 100 nF (then 4.7 µF).
- Pin 13 has a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 2.2 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: 3.3V 91% |
|
| Pin 2 | Connected to: Not connected 91% | — |
| Pin 3 | Connected to: Not connected 91% | — |
| Pin 4 | Connected to: Not connected 91% | — |
| Pin 5 | Connected to: Not connected 100% | — |
| Pin 6 | Connected to: Not connected 100% | — |
| Pin 7 | Connected to: Not connected 90% | — |
| Pin 8 | Connected to: 3.3V 91% |
|
| Pin 9 | Connected to: GND 64% · a signal 18% | — |
| Pin 10 | Connected to: Signal 82% |
|
| Pin 11 | Connected to: GND 73% · not connected 18% | — |
| Pin 12 | Connected to: Not connected 60% · a signal 40% | — |
| Pin 13 | Connected to: VCC 90% |
|
| Pin 14 | Connected to: Not connected 100% | — |
| Pin 15 | Connected to: Not connected 100% | — |
| Pin 16 | Connected to: Not connected 100% | — |
| Pin 17 | Connected to: Not connected 100% | — |
| Pin 18 | Connected to: GND 100% | — |
| Pin 19 | Connected to: Not connected 100% | — |
| Pin 20 | Connected to: GND 100% | — |
| Pin 21 | Connected to: Not connected 90% | — |
| Pin 22 | Connected to: VCC 60% · a signal 30% |
|
| Pin 23 | Connected to: The microcontroller 70%, a connector 20% |
|
| Pin 24 | Connected to: The microcontroller 70%, a connector 20% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RCCAR IF Board GPS by vedderb, OpenFence by plyalex, QUarkNano 9250 by ukmook and Tinyfc core by wangyeee.
The MPU9250 in open source designs
The gallery holds 13 open source boards using the MPU9250 from 11 GitHub repositories; a typical one measures about 57 × 55 mm and carries around 103 components.
54% use four copper layers or more, and 77% carry an open source license.
The most starred is RCCAR IF Board GPS by vedderb.
Parts used alongside the MPU9250
Microcontrollers on boards using the MPU9250
What boards using the MPU9250 are built for
MPU9250: common questions
Where can I find a MPU9250 reference design?
Each of the 13 boards on this page is a real design using the MPU9250. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MPU9250 pin 1?
Pin 1 has a decoupling capacitor on 10 of 11 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 11 open source designs using the MPU9250.
What decoupling capacitors do designs use on the MPU9250 pin 8?
Pin 8 has a decoupling capacitor on 10 of 11 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 11 open source designs using the MPU9250.
How is the MPU9250 pin 10 connected?
Pin 10 has a capacitor to GND on 10 of 11 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 11 open source designs using the MPU9250.
What parts are used alongside the MPU9250?
The STM32F40X_LQFP64, TJA1051TK-3, AD8418, DRV8301 and LM3671 appear in the most repositories here.
Which microcontrollers do boards using the MPU9250 use?
Most are built on STM32 (9), AVR/Arduino (1), ESP8266 (1) and Microchip SAM (1).
How big is a typical board using the MPU9250?
The median is 57 × 55 mm, and 46% are two-layer designs.
What is the most popular open source board using the MPU9250?
By GitHub stars, RCCAR IF Board GPS by vedderb, with 145 stars.
Can I simulate one of these boards using the MPU9250 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.