Solar panel-NoCutout
proveskit·solar_boards·bare_varients/XY_Faces/solar-panel-NoCutout.kicad_pcb
About the Solar panel-NoCutout PCB
Solar panel-NoCutout is an open source PCB design by proveskit, published on GitHub under the CERN-OHL-W-2.0 license. It is a 4-layer board measuring 83 × 98 mm, with 21 components from 11 distinct parts.
Other key parts include the VEML7700, MCP9808_DFN and DRV2605LDGS. By type, the board carries 4 diodes, 3 ICs, 3 capacitors, 2 test points, 2 resistors and 1 connector.
It belongs with the power & battery and sensors designs in this gallery.
From the project
The solar panel boards for the PROVES Kit
Main components on the Solar panel-NoCutout
Solar panel-NoCutout bill of materials (BOM)
21 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | VEML7700 | XDCR_VEML7700-TT | U1 |
| 1 | MCP9808_DFN | MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm_ThermalVias | U2 |
| 1 | DRV2605LDGS | VSSOP-10_3x3mm_P0.5mm | U3 |
| 1 | CON-5040500591 | CON_5040500591 | J1 |
| 6 | SM101K07TF | KXOB101K08F-TR | SC1, SC2, SC3, SC4, SC5, SC6 |
| 2 | TestPoint | Test Pad | TP1, TP2 |
| 3 | CDBA240LL-HF | DO-214AC | D1, D2, D3 |
| 1 | CQY99 | LED_0603_1608Metric | D4 |
| 3 | 1UF 1uF | C_0805_2012Metric | C2, C3, C5 |
| 1 | 1k | R_0603_1608Metric | R1 |
| 1 | 0-OHM 0-Ohm | R_0603_1608Metric | R3 |
Solar panel-NoCutout design files
The KiCad project lives in the proveskit/solar_boards repository on GitHub; these links point at the commit this page was built from.
Solar panel-NoCutout: common questions
How big is the Solar panel-NoCutout PCB?
The Solar panel-NoCutout measures 83 × 98 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Solar panel-NoCutout?
21 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Solar panel-NoCutout design files?
From the proveskit/solar_boards repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Solar panel-NoCutout design in my own project?
Yes, under the terms of its CERN-OHL-W-2.0 license, which proveskit chose for the repository.
More boards in solar_boards
Solar panel side-Z
proveskit
100 × 100 mm41 parts4LCERN-OHL-W-2.04XY Faces V3r
proveskit
83 × 98 mm33 parts4LCERN-OHL-W-2.04XY Faces V3lp
proveskit
83 × 98 mm27 parts4LCERN-OHL-W-2.04XY Face V4
proveskit
83 × 98 mm25 parts4LCERN-OHL-W-2.04Z Face V3
proveskit
100 × 100 mm21 parts4LCERN-OHL-W-2.04Solar panel-RBFHole
proveskit
83 × 98 mm21 parts4LCERN-OHL-W-2.04XY Face V4nb
proveskit
83 × 98 mm19 parts4LCERN-OHL-W-2.042U XY V1a
proveskit
83 × 212.6 mm19 parts4LCERN-OHL-W-2.04XY V3 Stencil
proveskit
83 × 98 mm9 parts4LCERN-OHL-W-2.04
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k