33 open source boards using the VEML7700

Real designs built with the VEML7700, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

33 boardsClear filters|Most starred

How designs wire the VEML7700

Read from the KiCad layouts of 29 open source designs, one per repository: what each pin of the VEML7700 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 28 of 29 designs, most often 100 nF (then 10 µF).
  • The SCL pin has a pull-up to 3.3V on 25 of 29 designs, most often 2.2 kΩ (then 10 kΩ).
  • The SDA pin has a pull-up to 3.3V on 25 of 29 designs, most often 2.2 kΩ (then 10 kΩ).
SCLpin 1Connected to: T-Micro32_Plus 66%
  • Pull-up to 3.3V on 86% · 2.2 kΩ (21), 10 kΩ (3), 4.7 kΩ (2)
VDDpin 2Connected to: 3.3V 93%
  • Decoupling capacitor on 97% · 100 nF (27), 10 µF (3), 1 µF (1)
GNDpin 3Connected to: GND 100%
SDApin 4Connected to: T-Micro32_Plus 66%
  • Pull-up to 3.3V on 86% · 2.2 kΩ (21), 10 kΩ (3), 4.7 kΩ (2)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include View base by scottbez1, SmartKnob DevKit Base by SeedLabs-it, Broadcast clock by espena and ESP-AHT10-Extra by c-.

The VEML7700 in open source designs

The gallery holds 33 open source boards using the VEML7700 from 29 GitHub repositories; a typical one measures about 81.2 × 81.2 mm and carries around 78 components.

76% are two-layer designs, the rest use four layers or more, and 94% carry an open source license.

The most starred is View base by scottbez1.

Microcontrollers on boards using the VEML7700

VEML7700: common questions

Where can I find a VEML7700 reference design?

Each of the 33 boards on this page is a real design using the VEML7700. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the VEML7700 VDD pin?

The VDD pin has a decoupling capacitor on 28 of 29 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 29 open source designs using the VEML7700.

What pull-up resistor is used on the VEML7700 SCL pin?

The SCL pin has a pull-up to 3.3V on 25 of 29 designs, most often 2.2 kΩ (then 10 kΩ). Counted from the KiCad layouts of 29 open source designs using the VEML7700.

What pull-up resistor is used on the VEML7700 SDA pin?

The SDA pin has a pull-up to 3.3V on 25 of 29 designs, most often 2.2 kΩ (then 10 kΩ). Counted from the KiCad layouts of 29 open source designs using the VEML7700.

What parts are used alongside the VEML7700?

The HX711, MT6701-CT, SN74LV1T34DBV, TMC6300 and AP2114HA-3.3 appear in the most repositories here.

Which microcontrollers do boards using the VEML7700 use?

Most are built on ESP32 (4), ESP8266 (1) and GD32 (1).

How big is a typical board using the VEML7700?

The median is 81.2 × 81.2 mm, and 76% are two-layer designs.

What is the most popular open source board using the VEML7700?

By GitHub stars, View base by scottbez1, with 22,165 stars.

Can I simulate one of these boards using the VEML7700 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part