Z Face V3
proveskit·solar_boards·Z_Face_V3/Z_Face_V3.kicad_pcb
About the Z Face V3 PCB
Z Face V3 is an open source PCB design by proveskit, published on GitHub under the CERN-OHL-W-2.0 license. It is a 4-layer board measuring 100 × 100 mm, with 21 components from 16 distinct parts.
Other key parts include the VEML7700, DRV2605LDGS, AD8495 and ADS1015IDGS. By type, the board carries 6 capacitors, 5 resistors, 4 ICs, 4 diodes and 2 connectors.
It belongs with the power & battery and sensors designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
The solar panel boards for the PROVES Kit
Main components on the Z Face V3
Z Face V3 bill of materials (BOM)
21 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | VEML7700 VEML6031X00 | SENSOR-SMD_VEML6031X00 | U1 |
| 1 | DRV2605LDGS | VSSOP-10_3x3mm_P0.5mm | U2 |
| 1 | AD8495 TCA4311A | VSSOP-8_3x3mm_P0.65mm | U4 |
| 1 | ADS1015IDGS TMP112xxDRL | SOT-563 | U5 |
| 1 | CON-5040500591 Molex FC Connection | MOLEX_5040500691 | J1 |
| 1 | SCREW_TERMINAL_01X02 DF11 FC Connection | Hirose_DF11-6DP-2DSA_2x03_P2.00mm_Vertical | J2 |
| 3 | CDBA240LL-HF | DO-214AC | D1, D2, D3 |
| 1 | CQY99 | LED_0603_1608Metric | D4 |
| 1 | 1UF 10nF | C_0402_1005Metric | C1 |
| 2 | 1UF 1uF | C_0402_1005Metric | C2, C3 |
| 1 | 1UF 100nF | C_0402_1005Metric | C4 |
| 1 | 0.01UF 10nF | C_0402_1005Metric | C5 |
| 1 | 0.01UF 100nF | C_0402_1005Metric | C6 |
| 2 | 10k | C_0402_1005Metric | R1, R5 |
| 1 | 1-MOHM 10k | C_0402_1005Metric | R2 |
| 2 | 100-OHM 10k | C_0402_1005Metric | R3, R4 |
Z Face V3 design files
The KiCad project lives in the proveskit/solar_boards repository on GitHub; these links point at the commit this page was built from.
Z Face V3: common questions
How big is the Z Face V3 PCB?
The Z Face V3 measures 100 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Z Face V3?
21 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Z Face V3 design files?
From the proveskit/solar_boards repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Z Face V3 design in my own project?
Yes, under the terms of its CERN-OHL-W-2.0 license, which proveskit chose for the repository.
More boards in solar_boards
Solar panel side-Z
proveskit
100 × 100 mm41 parts4LCERN-OHL-W-2.04XY Faces V3r
proveskit
83 × 98 mm33 parts4LCERN-OHL-W-2.04XY Faces V3lp
proveskit
83 × 98 mm27 parts4LCERN-OHL-W-2.04XY Face V4
proveskit
83 × 98 mm25 parts4LCERN-OHL-W-2.04Solar panel-RBFHole
proveskit
83 × 98 mm21 parts4LCERN-OHL-W-2.04Solar panel-NoCutout
proveskit
83 × 98 mm21 parts4LCERN-OHL-W-2.04XY Face V4nb
proveskit
83 × 98 mm19 parts4LCERN-OHL-W-2.042U XY V1a
proveskit
83 × 212.6 mm19 parts4LCERN-OHL-W-2.04XY V3 Stencil
proveskit
83 × 98 mm9 parts4LCERN-OHL-W-2.04
Earlier revisions in the repo: Z_Face_V2
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k