HardLabs

Esp32-c6-environmental logger

pushtiujeniya·esp32-c6-environmental-logger

Esp32-c6-environmental logger PCB layout, top view — open source ESP32 board by pushtiujeniya

About the Esp32-c6-environmental logger PCB

Esp32-c6-environmental logger is an open source ESP32 PCB design by pushtiujeniya, published on GitHub. It is a 4-layer board measuring 75 × 56.4 mm, with 59 components from 34 distinct parts.

Its main chip is the ESP32-C6-WROOM-1, from the ESP32 family. Other key parts include the TP4056-42-ESOP8, USBLC6-2SC6, HDC2033, SSD1306_0.96" and SGP41-D-R4. By type, the board carries 23 resistors, 12 capacitors, 8 ICs, 8 diodes, 5 connectors and 2 switches.

It belongs with the sensors, iot & wireless and power & battery designs in this gallery.

From the project

This repository contains an Environmental Sensor Station and Data Logger powered by the ESP32-C6-WROOM-1 microcontroller.

An open-source, 4-layer IoT environmental monitoring station and telemetry data logger powered by the ESP32-C6-WROOM-1 microcontroller. This board utilizes multi-protocol wireless connectivity (Wi-Fi 6, BLE 5, and Zigbee/Thread) to read atmospheric and gas sensors, display local telemetry, and securely back up data to a local MicroSD card.

This board is structured with an optimized 4-layer stackup:

Main components on the Esp32-c6-environmental logger

ESP32-C6-WROOM-1TP4056-42-ESOP8USBLC6-2SC6HDC2033SSD1306_0.96"SGP41-D-R4SCD41-D-R2AP2112K-3.3

Esp32-c6-environmental logger bill of materials (BOM)

59 components, 34 distinct parts.

QtyPartRefs
1
ESP32-C6-WROOM-1
U1
1
TP4056-42-ESOP8
U2
1
USBLC6-2SC6
U3
1
HDC2033
U4
1
SSD1306_0.96"
U5
1
SGP41-D-R4
U6
1
SCD41-D-R2
U7
1
AP2112K-3.3
U8
1
AO3401A
Q1
1
USB_C_Receptacle_USB2.0_16P
J1
1
Conn_01x04
J2
1
Conn_02x03_Odd_Even
J3
1
Micro_SD_Card
J4
1
Conn_01x02_Socket
J5
2
SW_SPST
SW1, SW2
2
green
D1, D7
1
blue
D2
2
ESD9B3.3ST5G
D3, D4
1
CLV1L-FKB
D5
1
red
D6
Show 14 more
QtyPartRefs
1
SS14
D8
1
1uF
C1
1
22uF
C2
4
0.1uF
C3, C4, C5, C6
4
10uF
C7, C10, C11, C12
1
0.1uF
C8
1
0.1uF
C9
2
5K1
R1, R2
7
10k
R3, R6, R12, R13, R14, R15, R16
7
1k
R4, R5, R9, R10, R11, R21, R22
2
4.7k
R7, R8
3
33
R17, R18, R19
1
1K2
R20
1
100k
R23

Esp32-c6-environmental logger design files

The KiCad project lives in the pushtiujeniya/esp32-c6-environmental-logger repository on GitHub; these links point at the commit this page was built from.

Esp32-c6-environmental logger: common questions

What microcontroller does the Esp32-c6-environmental logger use?

The Esp32-c6-environmental logger is built around the ESP32-C6-WROOM-1, from the ESP32 family.

How big is the Esp32-c6-environmental logger PCB?

The Esp32-c6-environmental logger measures 75 × 56.4 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Esp32-c6-environmental logger?

59 components, from 34 distinct parts. The full bill of materials is listed on this page.

Where can I download the Esp32-c6-environmental logger design files?

From the pushtiujeniya/esp32-c6-environmental-logger repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Esp32-c6-environmental logger design in my own project?

The repository has no license, so all rights stay with pushtiujeniya. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Esp32-c6-environmental logger without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards