NTerm2-S

RetepV·nTerm2-S

NTerm2-S PCB layout, top view — open source ESP32 board by RetepV

About the NTerm2-S PCB

NTerm2-S is an open source ESP32 PCB design by RetepV, published on GitHub. It is a 2-layer board measuring 147.3 × 55.9 mm, with 99 components from 53 distinct parts.

Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the LM386, MAX3232E, CP2102N-AXX-XQFN28, NCP1117-3.3_SOT223 and USBLC6-2SC6. By type, the board carries 40 resistors, 27 capacitors, 8 transistors, 7 diodes, 6 ICs and 5 connectors.

It belongs with the usb & debug tools designs in this gallery.

From the project

My rendition of the uTerm2-S. In SMD, but easily solderable. In a slightly more usable form. As extra, it can switch between normal and cross (null-modem) in software.

My rendition of the uTerm2-S by Just4Fun (https://hackaday.io/project/181583-uterm2-s-a-multi-emulation-color-rs232-terminal). This one is in SMD, and I hopefully made it easily hand-solderable for everyone (with maybe the exception of the CP2102). Obviously the 'n' in nTerm stands for 'nano.' :P

The nTerm2-S has a slightly more usable form the uTerm2-S, I think. Smaller and a little more usable when sitting permanently on a desk. And as an extra, it can switch between normal and cross (null-modem) from the software so that you wil never have to search for that null-modem cable ever again.…

NTerm2-S, from the project README
From the project README

Main components on the NTerm2-S

NTerm2-S bill of materials (BOM)

99 components, 53 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-WROOM-32
U1
1
LM386
U2
1
MAX3232E
U3
1
CP2102N-AXX-XQFN28
CP2102N-Axx-xQFN28
U4
1
NCP1117-3.3_SOT223
U5
1
USBLC6-2SC6
U6
5
BC817
Q1, Q2, Q3, Q4, Q5
3
BC817
Q6, Q7, Q8
1
Keyboard
J2
1
Mouse
J3
1
Line-out/Speaker
J4
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J6
1
Line-out/Speaker
J7
3
IM41 3V
K1, K2, K3
1
IO0
SW1
1
RESET
SW2
1
DEFAULTS
SW3
1
1N5819
D3
1
LED
D4
3
BAT43W-V
D6, D8, D10
Show 33 more
QtyPartRefs
2
LED_Dual_AKAK
D11, D12
1
220U
220u
C1
1
100U
100u
C2
1
10U
10u
C3
1
47N
47n
C4
1
2.2N
2.2n
C5
2
100N
100n
C6, C7
7
0.1U
0.1u
C8, C9, C10, C11, C12, C19, C21
1
10U/25V
10u/25v
C13
1
0.1U/25V
0.1u/25v
C14
4
1n
C15, C16, C22, C24
1
1u
C17
1
100U
100u
C18
1
10U
10u
C20
1
100U/25V
100u/25V
C23
3
470U
470u
C25, C26, C27
3
820
R1, R3, R5
3
390
R2, R4, R6
2
220
R7, R8
4
2K2
R9, R10, R13, R14
4
120
R11, R12, R15, R16
1
10
R17
4
10K
R18, R19, R22, R23
1
150
R20
1
270
R21
3
470
R24, R25, R28
2
12K
R26, R29
1
5K
R27
5
2K
R30, R35, R36, R37, R38
1
4.7K
R31
3
3K9
2K2
R32, R33, R34
1
22.1K
R39
1
47.5K
R40

NTerm2-S design files

The KiCad project lives in the RetepV/nTerm2-S repository on GitHub; these links point at the commit this page was built from.

NTerm2-S: common questions

What microcontroller does the NTerm2-S use?

The NTerm2-S is built around the ESP32-WROOM-32, from the ESP32 family.

How big is the NTerm2-S PCB?

The NTerm2-S measures 147.3 × 55.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the NTerm2-S?

99 components, from 53 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the NTerm2-S design files?

From the RetepV/nTerm2-S repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the NTerm2-S design in my own project?

The repository has no license, so all rights stay with RetepV. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the NTerm2-S without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards