Wall led matrix
richardwei6·wall-led-matrix
About the Wall led matrix PCB
Wall led matrix is an open source ESP32 PCB design by richardwei6, published on GitHub. It is a 2-layer board measuring 73 × 95.9 mm, with 91 components from 15 distinct parts.
Its main chip is the ESP32-S3-WROOM-2-N32R8V, from the ESP32 family. Other key parts include the LD1117S33TR_SOT223 and TPS2115APW. By type, the board carries 44 capacitors, 36 diodes, 4 resistors, 3 ICs, 2 connectors and 2 switches.
It belongs with the displays & leds and iot & wireless designs in this gallery.
From the project
HOPE KiCAD Wireless Wall LED matrix
Main components on the Wall led matrix
Wall led matrix bill of materials (BOM)
91 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-2-N32R8V | ESP32-S3-WROOM-2 | U1 |
| 1 | LD1117S33TR_SOT223 | SOT-223-3_TabPin2 | U2 |
| 1 | TPS2115APW | SON65P300X300X100-9N | U3 |
| 1 | USB_C_Receptacle_USB2.0 | CUI_UJ31-CH-G2-SMT-TR | J1 |
| 1 | Conn_01x02_Socket | PinHeader_1x02_P1.00mm_Horizontal | J2 |
| 1 | Reset | SOIC_FS-1000P_OMR | SW1 |
| 1 | Boot | SOIC_FS-1000P_OMR | SW2 |
| 36 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8 +28 |
| 39 | 100nF | C_0603_1608Metric | C1, C7, C8, C9, C10, C11, C12, C13 +31 |
| 1 | 10uF | C_0603_1608Metric | C2 |
| 3 | .1uF | C_0603_1608Metric | C3, C5, C6 |
| 1 | 1uF | C_0603_1608Metric | C4 |
| 1 | 5.1 k | R_0603_1608Metric | R1 |
| 1 | 10k | R_0603_1608Metric | R3 |
| 2 | 400 | R_1206_3216Metric | R4, R5 |
Wall led matrix design files
The KiCad project lives in the richardwei6/wall-led-matrix repository on GitHub; these links point at the commit this page was built from.
- LayoutLED_Display.kicad_pcb
- SchematicLED_Display.kicad_sch
Wall led matrix: common questions
What microcontroller does the Wall led matrix use?
The Wall led matrix is built around the ESP32-S3-WROOM-2-N32R8V, from the ESP32 family.
How big is the Wall led matrix PCB?
The Wall led matrix measures 73 × 95.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Wall led matrix?
91 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Wall led matrix design files?
From the richardwei6/wall-led-matrix repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Wall led matrix design in my own project?
The repository has no license, so all rights stay with richardwei6. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Wall led matrix without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k