6 open source boards using the ESP32-S3-WROOM-2-N32R8V

Real designs built with the ESP32-S3-WROOM-2-N32R8V, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the ESP32-S3-WROOM-2-N32R8V

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the ESP32-S3-WROOM-2-N32R8V connects to, and the resistors, capacitors and other passives placed on it.

  • The EN pin has a pull-up to 3.3V on 6 of 6 designs, most often 10 kΩ (then 5.1 kΩ).
  • The 3V3 pin is tied to 3.3V on 6 of 6 designs.
  • The EN pin has a capacitor to GND on 5 of 6 designs, most often 100 nF (then 1 µF).
  • The IO4 pin is left unconnected on 5 of 6 designs.
GNDpin 1, 40, 41, 41_1, 41_2, 41_3, 41_4, 41_5, 41_6, 41_7, 41_8, 41_9, 41_10, 41_11, 41_12, 41_13, 41_14, 41_15, 41_16, 41_17, 41_18, 41_19, 41_20, 41_21Connected to: GND 69% · not connected 31%
3V3pin 2Connected to: 3.3V 100%
ENpin 3Connected to: Signal 100%
  • Pull-up to 3.3V on 100% · 10 kΩ (5), 5.1 kΩ (1)
  • Capacitor to GND on 83% · 100 nF (3), 1 µF (2)
IO4pin 4Connected to: Not connected 83% · a signal 17%
IO17pin 10Connected to: Not connected 67% · a signal 33%
IO18pin 11Connected to: Not connected 67% · a signal 33%
IO3pin 15Connected to: Not connected 67% · a signal 33%
IO46pin 16Connected to: Not connected 83% · a signal 17%
IO47pin 24Connected to: Not connected 83% · a signal 17%
IO45pin 26Connected to: Not connected 83% · a signal 17%
IO0pin 27Connected to: Signal 100%
  • Capacitor to GND on 67% · 100 nF (3), 2.2 µF (1)
NCpin 28, 29, 30Connected to: Not connected 100%
IO38pin 31Connected to: Not connected 67% · 3.3V 17% · a signal 17%
IO39pin 32Connected to: Not connected 67% · a signal 33%
IO40pin 33Connected to: Not connected 83% · a signal 17%
IO42pin 35Connected to: Not connected 67% · a signal 33%
RXD0pin 36Connected to: Not connected 83% · a signal 17%
TXD0pin 37Connected to: Not connected 83% · a signal 17%
IO1pin 39Connected to: Signal 67% · not connected 33%
  • Pull-up to BATT on 33% · 82 kΩ (1), 5.1 kΩ (1)

18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FabRice by dev-campusfab, TI83x by pjschinske, EnchantiS3 by aburt2 and Lightbeam-S3 by besser435.

The ESP32-S3-WROOM-2-N32R8V in open source designs

The gallery holds 6 open source boards using the ESP32-S3-WROOM-2-N32R8V from 6 GitHub repositories; a typical one measures about 72.8 × 69.7 mm and carries around 74 components.

50% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is FabRice by dev-campusfab.

Microcontrollers on boards using the ESP32-S3-WROOM-2-N32R8V

What boards using the ESP32-S3-WROOM-2-N32R8V are built for

ESP32-S3-WROOM-2-N32R8V: common questions

Where can I find a ESP32-S3-WROOM-2-N32R8V reference design?

Each of the 6 boards on this page is a real design using the ESP32-S3-WROOM-2-N32R8V. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the ESP32-S3-WROOM-2-N32R8V EN pin?

The EN pin has a pull-up to 3.3V on 6 of 6 designs, most often 10 kΩ (then 5.1 kΩ). Counted from the KiCad layouts of 6 open source designs using the ESP32-S3-WROOM-2-N32R8V.

How is the ESP32-S3-WROOM-2-N32R8V 3V3 pin connected?

The 3V3 pin is tied to 3.3V on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the ESP32-S3-WROOM-2-N32R8V.

How is the ESP32-S3-WROOM-2-N32R8V IO4 pin connected?

The IO4 pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the ESP32-S3-WROOM-2-N32R8V.

Which microcontrollers do boards using the ESP32-S3-WROOM-2-N32R8V use?

Most are built on ESP32 (6).

How big is a typical board using the ESP32-S3-WROOM-2-N32R8V?

The median is 72.8 × 69.7 mm, and 50% are two-layer designs.

What is the most popular open source board using the ESP32-S3-WROOM-2-N32R8V?

By GitHub stars, FabRice by dev-campusfab, with 4 stars.

Can I simulate one of these boards using the ESP32-S3-WROOM-2-N32R8V before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part