IDE
RishobanK·IDE·hardware/nrf52840_sensor_hub.kicad_pcb
About the IDE PCB
IDE is an open source Nordic nRF PCB design by RishobanK, published on GitHub. It is a 4-layer board measuring 50 × 35 mm, with 8 components from 8 distinct parts.
Its main chip is the C192667, from the Nordic nRF family. Other key parts include the BME280, LSM6DSO, MCP73831T-2ACI/OT and TPS7A2033PDBVR. By type, the board carries 5 ICs and 3 connectors.
It belongs with the sensors and iot & wireless designs in this gallery.
From the project
Production-grade edge telemetry firmware and hardware built for the Nordic nRF52840 SoC running Zephyr RTOS. Integrates environmental and inertial sensor telemetry published simultaneously over a custom Bluetooth Low Energy (BLE 5.2) GATT service and an Industrial CAN 2.0B Bus Br
Production-grade edge telemetry firmware and hardware built for the Nordic nRF52840 SoC running Zephyr RTOS. Integrates environmental and inertial sensor telemetry published simultaneously over a custom Bluetooth Low Energy (BLE 5.2) GATT service and an Industrial CAN 2.0B Bus Bridge, secured by MCUboot dual-bank Over-the-Air (OTA) updates and verified through native GitHub Actions CI.
Main components on the IDE
IDE bill of materials (BOM)
8 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C192667 Raytac MDBT50Q-1M | Raytac_MDBT50Q-1M | U1 |
| 1 | BME280 | Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U2 |
| 1 | LSM6DSO | LGA-14_2.5x3mm_P0.5mm_LayoutBorder1x6 | U3 |
| 1 | MCP73831T-2ACI/OT MCP73831T | SOT-23-5 | U4 |
| 1 | TPS7A2033PDBVR TPS7A2033 | SOT-23-5 | U5 |
| 1 | FTSH-105-01-L-DV SWD_10P | PinHeader_2x05_P1.27mm_Vertical_SMD | J1 |
| 1 | TYPE-C-16P-01 TYPE-C-16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | B2B-PH-SM4-TB JST-PH-2P | JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J3 |
IDE design files
The KiCad project lives in the RishobanK/IDE repository on GitHub; these links point at the commit this page was built from.
IDE: common questions
What microcontroller does the IDE use?
The IDE is built around the C192667, from the Nordic nRF family.
How big is the IDE PCB?
The IDE measures 50 × 35 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the IDE?
8 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the IDE design files?
From the RishobanK/IDE repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the IDE design in my own project?
The repository has no license, so all rights stay with RishobanK. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the IDE without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
Similar boards
Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kNordic nRF
Pixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4kNordic nRF
Management
dennisss
101 × 31.5 mm50 parts2LApache-2.0381Nordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381Nordic nRF
Board hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381