Matchgroup test
rjwalters·kicad-tools·boards/07-matchgroup-test/output/matchgroup_test.kicad_pcb
About the Matchgroup test PCB
Matchgroup test is an open source STM32 PCB design by rjwalters, published on GitHub under the MIT license. It is a 6-layer board measuring 100 × 80 mm, with 43 components from 17 distinct parts.
Its main chip is the STM32F429ZIT6, from the STM32 family. Other key parts include the IS42S16400J-6TLI-TR and AP2112K-3.3TRG1. By type, the board carries 30 capacitors, 5 resistors, 3 ICs, 3 connectors and 2 diodes.
From the project
Standalone Python tools for parsing and manipulating KiCad schematic and PCB files
A standalone STM32F429ZIT6 MCU tests an IS42S16400J-6TLI-TR x16 SDR SDRAM. The real circuit replaces the former synthetic DDR/MIPI/HDMI routing fixture. It uses a six-layer board, 43 purchasable components and 216 connected pads. Firmware runs the MCU at 96 MHz and the memory at 48 MHz, tests all 8 MiB, and reports through status LEDs and a 3.3 V UART.
Manufacturing readiness is recorded in output/readiness.json and verified against the exact source, rules, evidence and exported package. Use output/manufacturing.zip only when that report is current and Ready. Hardware testing remains…
Main components on the Matchgroup test
Matchgroup test bill of materials (BOM)
43 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F429ZIT6 | LQFP-144_20x20mm_P0.5mm | U1 |
| 1 | IS42S16400J-6TLI-TR | TSOP-II-54_22.2x10.16mm_P0.8mm | U2 |
| 1 | AP2112K-3.3TRG1 | SOT-23-5 | U3 |
| 1 | B-2100S02P-A110 5V_INPUT | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | 2.54-1x6P SWD_3V3 | PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | 2.54-1*3P UART_3V3 | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | LTST-C190KGKT GREEN | LED_0603_1608Metric | D1 |
| 1 | LTST-C190KRKT RED | LED_0603_1608Metric | D2 |
| 21 | CC0603KRX7R9BB104 100nF | C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8 +13 |
| 2 | CL10A475KP8NNNC 4.7uF | C_0603_1608Metric | C20, C21 |
| 1 | CL10A105KB8NNNC 1uF | C_0603_1608Metric | C23 |
| 2 | CL10A225KO8NNNC 2.2uF | C_0603_1608Metric | C24, C25 |
| 2 | CL10A106KP8NNNC 10uF | C_0603_1608Metric | C26, C27 |
| 2 | CL10B103KB8NNNC 10nF | C_0603_1608Metric | C29, C30 |
| 1 | 0603WAF0000T5E 0R | R_0603_1608Metric | R1 |
| 2 | 0603WAF1002T5E 10k | R_0603_1608Metric | R2, R3 |
| 2 | 0603WAF1001T5E 1k | R_0603_1608Metric | R4, R5 |
Matchgroup test design files
The KiCad project lives in the rjwalters/kicad-tools repository on GitHub; these links point at the commit this page was built from.
Matchgroup test: common questions
What microcontroller does the Matchgroup test use?
The Matchgroup test is built around the STM32F429ZIT6, from the STM32 family.
How big is the Matchgroup test PCB?
The Matchgroup test measures 100 × 80 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the Matchgroup test?
43 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Matchgroup test design files?
From the rjwalters/kicad-tools repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Matchgroup test design in my own project?
Yes, under the terms of its MIT license, which rjwalters chose for the repository.
Can I test firmware for the Matchgroup test without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in kicad-tools
USB-C PD 5V supply — development
rjwalters
100 × 65 mm47 parts4LMIT74STM32
Matchgroup test routed
rjwalters
100 × 80 mm43 parts6LMIT74AVR/Arduino
Bldc controller routed
rjwalters
70 × 90 mm42 parts4LMIT74AVR/Arduino
Bldc controller
rjwalters
70 × 90 mm42 parts4LMIT74AVR/Arduino
Usb joystick
rjwalters
80 × 60 mm38 parts4LMIT74AVR/Arduino
Usb joystick routed
rjwalters
80 × 60 mm38 parts4LMIT74Diffpair test
rjwalters
90 × 70 mm36 parts4LMIT74Diffpair test routed
rjwalters
90 × 70 mm36 parts4LMIT74AVR/Arduino
Charlieplex 3x3
rjwalters
50 × 55 mm19 parts2LMIT74AVR/Arduino
Charlieplex 3x3 routed
rjwalters
50 × 55 mm19 parts2LMIT74STM32
Stm32 devboard routed
rjwalters
60 × 40 mm17 parts2LMIT74
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k